TIG Welding of Sintered AISI 316 L Stainless Steel

被引：2

作者：

Martins das Neves, Mauricio David ^{[1
]}

Barbosa, Luzinete Pereira ^{[1
]}

Elias da Silva, Luis Carlos ^{[1
]}

Correa, Olandir Vercino ^{[1
]}

Costa, Isolda ^{[1
]}

机构：

[1] IPEN CNEN SP, CCTM, BR-05508000 Sao Paulo, Brazil

来源：

ADVANCED POWDER TECHNOLOGY VII | 2010年 / 660-661卷

关键词：

Welding; stainless steel sintered; AISI; 316; L;

D O I：

10.4028/www.scientific.net/MSF.660-661.454

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Stainless steel (SS) powders are used in the preparation of sintered SS products. One of the applications of sintered SS products is as filters in the petrochemical and food processing industries. In these industries, the SS filters are subject to severe conditions associated with the removal of solid particles from the fluid. Hence, SS filters should have adequate mechanical strength and high corrosion resistance. Welding can be used to manufacture SS filters. In this study, sintered AISI 316L specimens were welded using the TIG (Tungsten Inert Gas) process. The weld joints were examined by optical microscopy and by scanning electron microscopy. Electrochemical polarization measurements were carried out to evaluate the influence of welding on the corrosion resistance of sintered filters.

引用

页码：454 / 459

页数：6

共 50 条

[21] Effect of Ta interlayer on laser welding of NiTi to AISI 316L stainless steel
Ng, C. H.
Mok, Edwin S. H.
Man, H. C.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 226 : 69 - 77
[22] The Influence of Nanographite Addition on the Compaction Process and Properties of AISI 316L Sintered Stainless Steel
Kozub, Barbara
Uthayakumar, Marimuthu
Kazior, Jan
MATERIALS, 2022, 15 (10)
[23] FINITE ELEMENT MODELING OF TIG WELDING OF AISI 304L STAINLESS STEEL AND EXPERIMENTAL VALIDATION
Narayanareddy, V. V.
Vasudevan, M.
Muthukumaran, S.
Ganesh, K. C.
Chandrasekhar, N.
Vasantharaja, P.
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 368 - +
[24] An investigation into the explosive welding/cladding of Grade A ship steel/AISI 316L austenitic stainless steel
Kaya, Yakup
Kahraman, Nizamettin
MATERIALS & DESIGN, 2013, 52 : 367 - 372
[25] Study of Type 316L Stainless Steel TIG Welding with MoO3 Powder
Tsang, Kuang-Hung
Chuang, Ko-Jui
MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 901 - 904
[26] Investigation on dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using grey based Taguchi method
Ghosh, Nabendu
Pal, Pradip Kumar
Nandi, Goutam
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2018, 4 (03) : 385 - 401
[27] Modelling and Experimental Study of Dissimilar Arc Stud Welding of AISI 304L to AISI 316L Stainless Steel
Mezher, Marwan T.
Barrak, Osamah Sabah
Namer, Nasri S. M.
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2022, 14 (06): : 88 - 101
[28] Multi-response optimization of TIG dissimilar welding of AISI 1008 mild steel and AISI 316 stainless steel using grey-based Taguchi method
Ogbonna, Okwudili Simeon
Akinlabi Akinlabi, Stephen
Madushele, Nkosinathi
Fatoba, Olawale Samuel
Akinlabi, Esther Titilayo
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (1-2): : 749 - 758
[29] Laser Welding of AISI 316L Stainless Steel Produced by Additive Manufacturing or by Conventional Processes
Mokhtari, Morgane
Pommier, Pierrick
Balcaen, Yannick
Alexis, Joel
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2021, 5 (04):
[30] Effect of TIG welding parameters on 316 L stainless steel joints using taguchi L27 approach
Khrais, Samir
Mohammed, Awsan
Al, Ahmad Abdel
Darabseh, Tariq
MATERIALS RESEARCH EXPRESS, 2024, 11 (01)

← 1 2 3 4 5 →