Interaction of Si3N4 with Ni-Cr alloy under N2 or Ar atmosphere

被引:2
|
作者
Shimoo, T [1 ]
Okamura, K
Itoh, M
机构
[1] Univ Osaka Prefecture, Coll Engn, Dept Met & Mat Sci, Sakai, Osaka Fu 5998531, Japan
[2] Univ Osaka Prefecture, Sakai, Osaka Fu 5998531, Japan
关键词
D O I
10.1023/A:1004475702702
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In relation to the joining of silicon nitride ceramics to metal, the interaction of Si3N4 with Ni-Cr alloy was investigated at temperatures from 1073 to 1573 K under N-2 or Ar atmosphere. Reaction rates were determined by thermogravimetry and reaction products were examined by X-ray diffraction. CrN, Ni3Si, Ni5Si2, Ni2Si and (Cr, Si)(3)Ni2Si were produced under N2 atmosphere. In addition to these products, Ni3Si2, Cr3Si and Cr5Si3 also were produced under Ar atmosphere. The reaction products were considered from the standpoint of thermodynamics. While the incubation period was observed under Ar atmosphere, it was not observed under Ng atmosphere. The initial rates obeyed a linear rate equation. The rates at the later stage of reaction described a parabolic rate equation. The reaction mechanism model was proposed. (C) 1998 Kluwer Academic Publishers.
引用
收藏
页码:5169 / 5175
页数:7
相关论文
共 50 条
  • [21] Preparation of Si3N4–TiN–SiC composite by partial substitution of Ti–Si–Fe alloy for Si under N2 atmospherePreparation of Si3N4–TiN–SiC composite by partial substitution of Ti–Si–Fe alloy for Si under N2…L.Y. Yao et al.
    Lu-yan Yao
    Jin-hua Zhang
    Bing-qiang Han
    Yue-e Ni
    Chang-ming Ke
    Journal of Iron and Steel Research International, 2024, 31 (12) : 3048 - 3057
  • [22] Wettability of PdNi(Co)-Cr alloys on Si3N4 ceramic and joining of Si3N4 to Si3N4
    Hua-Ping Xiong
    Bo Chen
    Wan-Lin Guo
    Lei Ye
    Welding in the World, 2015, 59 : 33 - 44
  • [23] Combustion synthesis of α-Si3N4 at lower N2 pressure
    Yang, Yun
    Chen, Yixiang
    Lin, Zhiming
    Li, Jiangtao
    Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society, 2008, 36 (01): : 1 - 5
  • [24] Interaction of Si3N4 with 18%Cr-8%Ni austenitic stainless steel
    Shimoo, T
    Shibata, D
    Okamura, K
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1998, 106 (06) : 545 - 550
  • [25] Joining of Si3N4 to Si3N4 using a AuPd(Co, Ni)-V filler alloy and the interfacial reactions
    Xiong, Hua-Ping
    Chen, Bo
    Pan, Yu
    Zhao, Hai-Sheng
    Guo, Wan-Lin
    CERAMICS INTERNATIONAL, 2014, 40 (03) : 4141 - 4148
  • [26] Reaction of Si3N4 with 25%Cr-20%Ni austenitic stainless steel under nitrogen or argon atmosphere
    Shimoo, T
    Okamura, K
    Shibata, D
    JOURNAL OF MATERIALS SCIENCE, 2000, 35 (21) : 5485 - 5492
  • [27] Interfacial microstructure of Si3N4/Si3N4 joint brazed using Au–Ni–V filler alloy
    J. Zhang
    Y. Sun
    C. F. Liu
    H. W. Zhang
    Journal of Materials Science, 2010, 45 : 2188 - 2193
  • [28] Reaction of Si3N4 with 25%Cr-20%Ni austenitic stainless steel under nitrogen or argon atmosphere
    T. Shimoo
    K. Okamura
    D. Shibata
    Journal of Materials Science, 2000, 35 : 5485 - 5492
  • [29] Development of a new CuNiTiB brazing alloy for joining Si3N4 to Si3N4
    Huaping Xiong
    Chuangeng Wan
    Zhenfeng Zhou
    Metallurgical and Materials Transactions A, 1998, 29 : 2591 - 2596
  • [30] Development of a new CuNiTiB brazing alloy for joining Si3N4 to Si3N4
    Xiong, Huaping
    Wan, Chuangeng
    Zhou, Zhenfeng
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1998, 29 A (10): : 2591 - 2596