Impedimetric Chemosensing of Volatile Organic Compounds Released from Li-Ion Batteries

Detection of toxic and flammable gases and volatile organic compounds (VOCs) released from Li-ion batteries during thermal runaway can generate an early warning. A submicron (similar to 0.15 mu m)-thick poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) sensor film is coated on a platinum electrode through a facile aqueous dispersion. The resulting sensor reliably detected different volatile organic compounds (VOCs) released during the early stages of thermal runaway of lithium-ion batteries (LIBs) even at low concentrations. The single-electrode sensor utilizes impedance spectroscopy to measure ethyl methyl carbonate and methyl formate concentrations at 5, 15, and 30 ppm independently and in various combinations using ethanol as a reference. In contrast to DC resistance measurement, which provides a single parameter, impedance spectroscopy provides a wealth of information, including impedance and phase angle at multiple frequencies as well as fitted charge transfer resistance and constantphase elements. Different analytes influence the measurement of different parameters to varying degrees, enabling distinction using a single sensing material. The response time for ethyl methyl carbonate was measured to be 6 s. Three principal components (PCs) preserve more than 95% of information and efficiently enable discrimination of different classes of analytes. Application of low-power PEDOT:PSS-based gas sensors will facilitate cost-effective early detection of VOCs and provide early warning to battery management systems (BMS), potentially mitigating catastrophic thermal runaway events.