On the pin-bearing failure load of GFRP bolted laminates: An experimental analysis on the influence of bolt diameter

被引：75

作者：

Ascione, Francesco ^{[2
]}

Feo, Luciano ^{[1
]}

Maceri, Franco ^{[2
]}

机构：

[1] Univ Salerno, Dept Civil Engn, Fisciano, Italy

[2] Univ Roma Tor Vergata, Dept Civil Engn, Rome, Italy

来源：

COMPOSITES PART B-ENGINEERING | 2010年 / 41卷 / 06期

关键词：

Laminates; Glass fibres; Mechanical testing; STRENGTH; JOINTS; STIFFNESS; BEHAVIOR;

D O I：

10.1016/j.compositesb.2010.04.001

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents results summary of an experimental investigation aimed at evaluating the influence of the bolt diameter on the bearing failure strength of glass fibre reinforced polymer (GFRP) bolted laminates with epoxy matrix, for different values of fibre-to-load inclination angle. In this study, three different types of laminates were tested: one of them is mono-directional while the other two are bi-directional, with two different stacking sequence. Reductions in the pin-bearing ultimate load was found to be linearly dependent on bolt diameter. A pin-bearing design formula is also proposed based on experimental results. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：482 / 490

页数：9

共 15 条

[11] Influence of pin-fin height and diameter on flow and cooling characteristics of three-layer porous laminates: An experimental study
Zhang, Jie
Huaizhi, Han
Li, Zerong
Zhong, Huagui
[J]. EXPERIMENTAL HEAT TRANSFER, 2022, 35 (06) : 884 - 899
[12] Experimental study on failure modes and load-bearing capacities of wire and arc additively manufactured steel bolted connections
Liu, Yunyi
Ye, Jun
Sun, Bochao
Zhao, Weijian
Xia, Liang
[J]. Jianzhu Jiegou Xuebao/Journal of Building Structures, 2024, 45 (06): : 153 - 163
[13] Experimental analysis of tensile and compressive failure load in single-lap bolted joint of green composites
Choudhury, Mridusmita Roy
Debnath, Kishore
[J]. COMPOSITE STRUCTURES, 2019, 225
[14] Enhanced Failure Load Bearing in Adhesively Bonded Strap Repairs: Numerical Analysis and Experimental Results
Sadigh, Mohammad Ali Saeimi
[J]. JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2019, 19 (01) : 182 - 192
[15] Enhanced Failure Load Bearing in Adhesively Bonded Strap Repairs: Numerical Analysis and Experimental Results
Mohammad Ali Saeimi Sadigh
[J]. Journal of Failure Analysis and Prevention, 2019, 19 : 182 - 192

← 1 2 →