The Effect of Aluminum Oxide (Al2O3) and Cerium Oxide (CeO2) on the Structural and Mechanical Properties of Yttria Tetragonal Zirconia Polycrystal (Y-TZP)

被引:0
|
作者
Golieskardi, M. [1 ]
Satgunam, M. [1 ]
Ragurajan, D. [1 ]
Ansari, M. N. M. [1 ]
机构
[1] Univ Tenaga Nas, Ctr Adv Mat, Kajang 43000, Selangor, Malaysia
来源
关键词
Aluminum Oxide; Cerium Oxide; sintering behavior; Y-TZP; Mechanical Properties; LOW-TEMPERATURE DEGRADATION; BIOMEDICAL-GRADE ZIRCONIA; FRACTURE-RESISTANCE; CERAMICS; TRANSFORMATION; WATER; AIR;
D O I
暂无
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The effect of additions of Al2O3 and CeO2 (up to 1 wt %) on the sintering behavior of yttria-stabilized Tetragonal Zirconia Polycrystals (Y-TZP) were studied. The effects of Al2O3 and CeO2 on the Vickers hardness, bulk density, fracture toughness and Young's modulus were carried out on the sintered samples. The sintering temperature was ranging from 1250 degrees C to 1450 degrees C with the ramp rate of 10 degrees C/min. The results revealed that the doped samples demonstrated a stronger effect in contrast with the undoped samples. The relative densities were above 97.5 % of theoretical (i.e. > 6.1 gcm(-3)) could be obtained in Y-TZPs sintered at low temperatures, 1350 degrees C. The hardness's value of Y-TZP was increased in the 1 wt % Al2O3 and CeO2-doped samples when sintered above 1400 degrees C.
引用
收藏
页码:16 / 21
页数:6
相关论文
共 50 条
  • [21] INFLUENCE OF AN AMORPHOUS 2ND PHASE ON THE PROPERTIES OF YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS (Y-TZP)
    MECARTNEY, ML
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1987, 70 (01) : 54 - 58
  • [22] FABRICATION AND PROPERTIES OF (Y, CE)-TZP AL2O3 AND Y-TZP AL2O3 COMPOSITES FROM FINE POWDERS PREPARED BY A HYDROLYSIS TECHNIQUE
    HIRANO, M
    INADA, H
    NIPPON SERAMIKKUSU KYOKAI GAKUJUTSU RONBUNSHI-JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1991, 99 (02): : 124 - 130
  • [23] Differences in microstructure and mechanical properties between Y-TZP and AL2O3-doped Y-TZP/bioglass ceramics
    Soubelet, Clara G.
    Albano, Maria P.
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2021, 18 (06) : 2237 - 2249
  • [24] Joining of alumina to Tetragonal Zirconia Polycrystal (TZP) using a Bi2O3-Y2O3 filler
    Nejabat, M.
    Hadian, A. M.
    Zamani, C.
    CERAMICS INTERNATIONAL, 2024, 50 (21) : 40880 - 40888
  • [25] Influence of Y2O3 adding method on microstructure and properties of Al2O3 strengthened Y-TZP
    Liang, XP
    Yang, ZF
    Yuan, QM
    Jin, ZG
    JOURNAL OF RARE EARTHS, 2003, 21 : 120 - 123
  • [26] Influence of Y2O3 Adding Method on Microstructure and Properties of Al2O3 Strengthened Y-TZP
    梁小平
    杨正方
    袁启明
    靳正国
    JournalofRareEarths, 2003, (S1) : 120 - 123
  • [27] Mechanical properties of biocompatible Y-TZP/Al2O3 composites obtained from mechanically alloyed powders
    Bruno Xavier de Freitas
    Manuel Fellipe R. Pais Alves
    Claudinei Santos
    Alfeu Saraiva Ramos
    Erika Coaglia Trindade Ramos
    Kurt Strecker
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42
  • [28] FATIGUE BEHAVIOR OF 2 AND 4 MOL% Y2O3-CONTAINING TETRAGONAL ZIRCONIA POLYCRYSTALS (Y-TZP).
    Ashizuka, Masahiro
    Kiyohara, Hideki
    Gondo, Masaya
    Kubota, Yoshitaka
    Yogyo Kyokai Shi/Journal of the Ceramic Society of Japan, 1987, 95 (04): : 387 - 393
  • [29] Freeze casting of aqueous Al2O3/Y-TZP slurries
    Yang, TY
    Yoon, SY
    Lee, GD
    Wang, CA
    Huang, Y
    Stevens, R
    Park, HC
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1065 - 1068
  • [30] Hydrothermal synthesis of precursors for Y-TZP/α-Al2O3 composite
    Dell'Agli, G
    Mascolo, MC
    Mascolo, G
    POWDER TECHNOLOGY, 2004, 148 (01) : 7 - 10