A design of single-ended to differential-ended power divider for X band application

被引：18

作者：

Yu, Yongxia ^{[1
]}

Sun, Liguo ^{[1
]}

机构：

[1] Univ Sci & Technol China, Sch Elect Engn & Informat Sci, Beijing, Peoples R China

来源：

MICROWAVE AND OPTICAL TECHNOLOGY LETTERS | 2015年 / 57卷 / 11期

基金：

中国国家自然科学基金;

关键词：

power divider; single-ended to differential; stepped impendence; open stub;

D O I：

10.1002/mop.29404

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

A five-port power divider with single-ended input and two differential-ended outputs is proposed. The frequency ranges from 9 to 11 GHz with a central frequency of 10 GHz. A stepped impedance line with open stubs is used between differential pairs for broadening the bandwidth and miniaturization of the divider. The divider is fabricated and the measurement results comply with the simulation. A proper performance for differential mode signal is achieved. The insertion loss is within 1.8 dB, the isolation is more than 15 dB, and the return loss is more than 11 dB. In addition, the common mode suppression is reached as well. (c) 2015 Wiley Periodicals, Inc. Microwave Opt Technol Lett 55:2669-2673, 2015

引用

页码：2669 / 2673

页数：5

共 50 条

[41] Nonlinear Distortion in Differential Circuits with Single-Ended and Balanced Drive
Rahkonen, Timo
[J]. SCIENTIFIC COMPUTING IN ELECTRICAL ENGINEERING SCEE 2008, 2010, 14 : 175 - 182
[42] USING A DIFFERENTIAL I/O AMPLIFIER IN SINGLE-ENDED APPLICATIONS
Brisebois, Glen
[J]. ELECTRONICS WORLD, 2012, 118 (1909): : 38 - 39
[43] Single-ended input to differential output circuits -A comparative analysis
Casas, Roberto
Casas, Oscar
Ferrari, Vittorio
[J]. 2006 IEEE INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE PROCEEDINGS, VOLS 1-5, 2006, : 548 - +
[44] A Low Power, Low Noise, Single-Ended to Differential TIA for Ultrasound Imaging Probes
Firouz, Samira
Aghdam, Esmaeil Najafi
Jafarnejad, Roya
[J]. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS, 2021, 68 (02) : 607 - 611
[45] A wideband high-CMRR single-ended to differential converter
Centurelli, Francesco
Luzzi, Raimondo
Tommasino, Pasquale
Trifiletti, Alessandro
[J]. ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 2009, 59 (01) : 43 - 52
[46] Single-Ended and Differential Ka-Band BiCMOS Phased Array Front-Ends
Min, Byung-Wook
Rebeiz, Gabriel A.
[J]. IEEE JOURNAL OF SOLID-STATE CIRCUITS, 2008, 43 (10) : 2239 - 2250
[47] A wideband high-CMRR single-ended to differential converter
Francesco Centurelli
Raimondo Luzzi
Pasquale Tommasino
Alessandro Trifiletti
[J]. Analog Integrated Circuits and Signal Processing, 2009, 59 : 43 - 52
[48] A high speed differential to single-ended amplifier for instrumentation applications
Dean, D
Harjani, R
[J]. ISCAS 2000: IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS - PROCEEDINGS, VOL III: EMERGING TECHNOLOGIES FOR THE 21ST CENTURY, 2000, : 459 - 462
[49] A scalable model methodology for octagonal differential and single-ended inductors
Blaschke, Volker
Victory, James
[J]. PROCEEDINGS OF THE IEEE 2006 CUSTOM INTEGRATED CIRCUITS CONFERENCE, 2006, : 717 - 720
[50] BROAD-BAND SINGLE-ENDED TO DIFFERENTIAL SIGNAL CONVERTER EMBEDDED IN SILICON DECISION CIRCUIT
RAMAKRISHNAN, V
ALBERS, JN
NOTTENBURG, RN
HILLERY, WJ
[J]. ELECTRONICS LETTERS, 1995, 31 (17) : 1400 - 1401

← 1 2 3 4 5 →