Dynamic cyclic and torsional fatigue resistance of TruNatomy compared with different nickel-titanium rotary instruments

被引：17
|
作者：
Elnaghy, Amr M. [1 ]
Elsaka, Shaymaa E. [2 ,3 ]
Elshazli, Alaa H. [1 ]
机构：
[1] Mansoura Univ, Dept Endodont, Fac Dent, Mansoura 35516, Egypt
[2] Mansoura Univ, Dept Dent Biomat, Fac Dent, Mansoura, Egypt
[3] Alfarabi Private Coll Dent & Nursing, Dept Restorat Sci, Jeddah, Saudi Arabia
来源：
AUSTRALIAN ENDODONTIC JOURNAL | 2020年 / 46卷 / 02期
关键词：
cyclic fatigue; heat treatment; torsional fatigue; TruNatomy; ROOT-CANAL INSTRUMENTS; PROFILE VORTEX; IN-VITRO; FILES; BLUE;
D O I：
10.1111/aej.12396
中图分类号：
R78 [口腔科学];
学科分类号：
1003 ;
摘要：
This study evaluated the dynamic cyclic and torsional fatigue resistance of recently introduced TruNatomy instruments (TRN) and compare with HyFlex CM (HFC), Vortex Blue (VB) and FlexMaster (FM) instruments. Size 20, 0.04 taper of TRN, HFC, VB and FM instruments was tested for dynamic cyclic and torsional fatigue resistance. Dynamic cyclic fatigue resistance was evaluated using an artificial canal with a radius of 5 mm and a 90 degrees angle of curvature. The number of cycles to failure (NCF) was calculated. The dynamic torsional fatigue resistance was evaluated by holding a 5 mm of the tip of each instrument in a metal block with composite resin. Torsional fatigue resistance was recorded by counting the number of load applications before fracture for each instrument. The HFC instruments had greater fatigue resistance than VB, TRN and FM. FM had a higher resistance to torsional stress than TRN, HFC and VB instruments.
引用
收藏
页码：226 / 233
页数：8
相关论文
共 50 条
  • [41] Effects of Electropolishing Surface Treatment on the Cyclic Fatigue Resistance of BioRace Nickel-Titanium Rotary Instruments
    Lopes, Helio P.
    Elias, Carlos N.
    Vieira, Victor T. L.
    Moreira, Edson J. L.
    Marques, Raquel V. L.
    Machado de Oliveira, Julio C.
    Debelian, Gilberto
    Siqueira, Jose F., Jr.
    JOURNAL OF ENDODONTICS, 2010, 36 (10) : 1653 - 1657
  • [42] Cyclic fatigue and torsional strength of three different thermally treated reciprocating nickel-titanium instruments
    Murilo Priori Alcalde
    Marco Antonio Hungaro Duarte
    Clovis Monteiro Bramante
    Bruno Carvalho de Vasconselos
    Mario Tanomaru-Filho
    Juliane Maria Guerreiro-Tanomaru
    Jader Camilo Pinto
    Marcus Vinicius Reis Só
    Rodrigo Ricci Vivan
    Clinical Oral Investigations, 2018, 22 : 1865 - 1871
  • [43] Evaluation of the cyclic fatigue resistance of rotary pathfinding instruments made of nickel-titanium (NiTi) alloys with different heat treatments
    Morais Correia Viana, Luiz Carlos Trevia
    Maniglia-Ferreira, Claudio
    de Almeida-Gomes, Fabio
    Gurgel Filho, Eduardo Diogo
    Garcia, Leonardo Pereira
    Pappen, Fernanda Geraldo
    GIORNALE ITALIANO DI ENDODONZIA, 2019, 33 (01): : 38 - 43
  • [44] Evaluation of the Cyclic Fatigue and Torsional Resistance of Novel Nickel-Titanium Rotary Files with Various Alloy Properties
    Kaval, Mehmet Emin
    Capai, Ismail Davut
    Ertas, Huseyin
    JOURNAL OF ENDODONTICS, 2016, 42 (12) : 1840 - 1843
  • [45] Effect of Repeated Autoclaving on Cyclic Fatigue of Three Nickel-Titanium Rotary Instruments
    Elbatal, Laila M.
    El Batouty, Kariem Mostafa
    Obeid, Maram Mohamed
    ENDO-ENDODONTIC PRACTICE TODAY, 2016, 10 (01): : 15 - 22
  • [46] Cyclic Fatigue Resistance of 3 Different Nickel-Titanium Reciprocating Instruments in Artificial Canals
    Higuera, Oscar
    Plotino, Gianluca
    Tocci, Luigi
    Carrillo, Gabriela
    Gambarini, Gianluca
    Jaramillo, David E.
    JOURNAL OF ENDODONTICS, 2015, 41 (06) : 913 - 915
  • [47] Influence of Rotational Speed on the Cyclic Fatigue of Rotary Nickel-Titanium Endodontic Instruments
    Lopes, Helio P.
    Ferreira, Alessandra A. P.
    Elias, Carlos N.
    Moreira, Edson J. L.
    Machado de Oliveira, Julio C.
    Siqueira, Jose F., Jr.
    JOURNAL OF ENDODONTICS, 2009, 35 (07) : 1013 - 1016
  • [48] Fatigue resistance of rotary instruments manufactured using different nickel-titanium alloys: a comparative study
    Plotino, Gianluca
    Testarelli, Luca
    Al-Sudani, Dina
    Pongione, Gianlcarlo
    Grande, Nicola M.
    Gambarini, Gianluca
    ODONTOLOGY, 2014, 102 (01) : 31 - 35
  • [49] Evaluation of cyclic and torsional fatigue resistance of several heat-treated reciprocating nickel-titanium instruments
    Weissheimer, Theodoro
    Duarte, Marco Antonio Hungaro
    So, Marcus Vinicius Reis
    da Rosa, Ricardo Abreu
    Espinosa, Michel Klymus
    Vivan, Rodrigo Ricci
    Alcalde, Murilo Priori
    AUSTRALIAN ENDODONTIC JOURNAL, 2023, 49 (03) : 524 - 529
  • [50] Torsional resistance of XP-endo Shaper at body temperature compared with several nickel-titanium rotary instruments
    Elnaghy, A. M.
    Elsaka, S. E.
    INTERNATIONAL ENDODONTIC JOURNAL, 2018, 51 (05) : 572 - 576
12345