The Design of a 390 GHz Gyrotron Based on a Cusp Electron Gun

被引:0
|
作者
Li, F. [1 ]
He, W. [1 ]
Phelps, A. D. R. [1 ]
Donaldson, C. R. [1 ]
Zhang, L. [1 ]
Cross, A. W. [1 ]
Ronald, K. [1 ]
机构
[1] Univ Strathclyde, SUPA, Dept Phys, Glasgow G4 0NG, Lanark, Scotland
关键词
TWT AMPLIFIER;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
A 390 GHz harmonic gyrotron based on a cusp electron gun was designed to operate on a TE(71) mode and the 7(th) cyclotron harmonic of a large orbit electron beam. This beam is produced by a cusp electron gun with a voltage of 40 keV, a current of 1.5 A and an adjustable velocity ratio from 1 to 3. Smooth cylindrical waveguide was studied and built as the interaction cavity. The relationship between the cavity dimensions and cavity Q was optimized for output at the design mode. A simple linear output taper with moderate mode conversion was used in the gyrotron output. Both theoretical analysis and numerical simulation results (using the 3D PIC code MAGIC) of this gyrotron will be presented. When the beam thickness and beam spread were introduced into the simulation, competitive modes were observed in the simulation resulting in a drop in the output power. A high frequency (325-500 GHz) VNA was used to measure the millimeter wave properties of the gyrotron cavity and the results are presented in this paper.
引用
收藏
页数:2
相关论文
共 50 条
  • [41] Thermal Analysis of Magnetron Injection Gun for 170GHz Gyrotron
    Tang, Chao
    Wang, Hui
    Niu, Xinjian
    Wan, Dinghai
    Liu, Yinghui
    Liu, Jianwei
    2019 12TH UK-EUROPE-CHINA WORKSHOP ON MILLIMETER WAVES AND TERAHERTZ TECHNOLOGIES (UCMMT), 2019,
  • [42] DESIGN PRINCIPLES FOR A SHEET-BEAM ELECTRON-GUN FOR A QUASI-OPTICAL GYROTRON
    MANHEIMER, WM
    FLIFLET, AW
    LEE, R
    IEEE TRANSACTIONS ON ELECTRON DEVICES, 1990, 37 (03) : 840 - 849
  • [43] Design of a pulsed 0.5 THz gyrotron and preliminary test of its electron gun with field emitter
    Glyavin, M.
    Manuilov, V
    Taradaev, E.
    Sominskii, G.
    Fokin, A.
    Sedov, A.
    INFRARED PHYSICS & TECHNOLOGY, 2020, 111
  • [44] Design and Numerical Optimization of a Cusp-Gun-Based Electron Beam for Millimeter-Wave Gyro-Devices
    Donaldson, Craig R.
    He, Wenlong
    Cross, Adrian W.
    Phelps, Alan D. R.
    Li, Fengping
    Ronald, Kevin
    Robertson, Craig W.
    Whyte, Colin G.
    Young, Alan R.
    Zhang, Liang
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2009, 37 (11) : 2153 - 2157
  • [45] The simulation of an high power 390GHz large-orbit harmonic gyrotron
    Li, Fengping
    2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE, 2008, : 235 - 236
  • [46] MAGNETRON INJECTION GUN (MIG) DESIGN FOR GYROTRON APPLICATIONS
    BAIRD, JM
    LAWSON, W
    INTERNATIONAL JOURNAL OF ELECTRONICS, 1986, 61 (06) : 953 - 967
  • [47] Design of a Low Aspect Ratio Electron Gun for a 220 GHz Sheet Electron Beam EIK
    Zhang Huafeng
    Ruan Cunjun
    2019 INTERNATIONAL VACUUM ELECTRONICS CONFERENCE (IVEC), 2019,
  • [48] Electron gun and collector design for 94-GHz gyro-amplifiers
    Nguyen, K.
    Danly, B.
    Levush, B.
    Blank, M.
    True, R.
    Felch, K.
    Borchard, P.
    Proceedings of the IEEE Particle Accelerator Conference, 1998, 3 : 3180 - 3182
  • [49] Electron gun and collector design for 94-GHz gyro-amplifiers
    Nguyen, K
    Danly, B
    Levush, B
    Blank, M
    True, R
    Felch, K
    Borchard, P
    PROCEEDINGS OF THE 1997 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-3: PLENARY AND SPECIAL SESSIONS ACCELERATORS AND STORAGE RINGS - BEAM DYNAMICS, INSTRUMENTATION, AND CONTROLS, 1998, : 3180 - 3182
  • [50] NUMERICAL SIMULATION OF MAGNETRON INJECTION GUN FOR 1 MW 120 GHz GYROTRON
    Singh, U.
    Kumar, N.
    Tandon, S.
    Khatun, H.
    Purohit, L. P.
    Sinha, A. K.
    PROGRESS IN ELECTROMAGNETICS RESEARCH LETTERS, 2010, 16 : 21 - 34