A vertical type tandem twin roll caster for clad strip equipped with a scraper

被引：4

作者：

Haga, Toshio ^{[1
]}

Tsuge, Hiroshi ^{[2
]}

Ishihara, Takuya ^{[2
]}

Kumai, Shinji ^{[3
]}

Watari, Hisaki ^{[4
]}

机构：

[1] Osaka Inst Technol, 5-16-1 Omiya Asahiku, Osaka 5358585, Japan

[2] Osaka Inst Technol, Osaka, Japan

[3] Tokyo Inst Technol, Yokohama 2268502, Japan

[4] Gunma Univ, Tenjin Cho Kiryu 3768515, Japan

来源：

MATERIAL FORMING ESAFORM 2014 | 2014年 / 611-612卷

关键词：

twin roll caster; clad strip; scraper; roll casting;

D O I：

10.4028/www.scientific.net/KEM.611-612.623

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A vertical type tandem twin roll caster equipped with a scraper for the clad strip was proposed. This roll caster could cast three layers clad strip which base strip had lower melting point than that of the overlay strips. The base strip was cast by an upper twin roll caster and the overlay strips were cast by a lower twin roll caster. The scrapers were attached to the lower twin roll caster, and were innovated to cast this type of three layers of clad strip. Solidified metals that became the overlay strips were pulled from between the scraper and the roll. The melt of the alloy which was as same as the base strip was poured between the scraper and the base strip. This melt connect the overlay strip and the base strip. The base strip was not re-melted. The scraper enabled that the solidified metal of the overlay strip contact to the melt of the base strip without mixing of the melt of the base and overlay strip. In this way, the sound three layers clad strip which base strip had lower melting point than that of the overlay strip could be cast by the vertical type tandem twin roll caster equipped with a scraper.

引用

页码：623 / 628

页数：6

共 50 条

[21] Casting of Al-25%Si Strip Using a Vertical Type Twin Roll Caster
Haga, Toshio
Harada, Hideto
Kumai, Shinji
Watari, Hisaki
ADVANCED MATERIALS, PTS 1-4, 2011, 239-242 : 1944 - +
[22] Casting of a wire inserted strip using a twin roll caster equipped with two nozzles
Haga, Toshio
Takahashi, Kenta
Kumai, Shinji
Warari, Hisaki
MATERIALS PROCESSING TECHNOLOGY, 2011, 337 : 556 - +
[23] Investigation of the influence of the roll surface on the cast strip at the casting using a vertical type high speed twin roll caster
Yamashiki, T.
Haga, T.
Kumai, S.
Watari, H.
FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 271 - +
[24] Casting of Al-Si-SiCp composite alloy strip by a vertical type twin roll caster
Harada, Hideto
Haga, Toshio
PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 2010, : 33 - 36
[25] Numerical investigations of influences on the flow in a vertical twin roll strip caster for stainless steel
Pelss, A.
Rueckert, A.
Pfeifer, H.
METALLURGIA ITALIANA, 2016, (02): : 29 - 34
[26] Inline Rolling of 5182 Aluminum Alloy Strip Cast by a Vertical Type High Speed Twin Roll Caster
Haga, Toshio
Hanada, Shuya
Kumai, Shinji
Watari, Hisaki
MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 477 - +
[27] A vertical-type twin roll caster for aluminum alloy strips
Haga, T
Takahashi, K
Ikawa, M
Watari, H
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 : 610 - 615
[28] Effect of Some Factors on Fabrication of Clad Strip by a Roll Caster
Haga, T.
Nakamura, R.
Ymabayashi, T.
Tsuge, T.
Kumai, S.
Watari, H.
MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 3327 - +
[29] Electromagnetic Dam in Twin-Roll Strip Caster
Yong-lin Ma
Bao-feng Wang
Bao-wei Li
Guo-dong Wang
Xiang-hua Liu
Journal of Iron and Steel Research International, 2006, 13 : 27 - 29
[30] Casting Process at Roll Bite in Strip Cast Using Vertical-Type High-Speed Twin-Roll Caster
Haga, Toshio
Kurahashi, Yukihiro
METALS, 2022, 12 (07)

← 1 2 3 4 5 →