Wear Resistance and Tensile Properties of Filler-added Polyamide 6 Fibers

被引：0
|
作者：
Irisawa, Toshihira [1 ]
Takamura, Tatsuro [1 ]
Momozono, Satoshi [2 ]
Kaneko, Junichi [3 ]
Shioya, Masatoshi [1 ]
机构：
[1] Tokyo Inst Technol, Dept Organ & Polymer Mat, Meguro Ku, Tokyo 1528552, Japan
[2] Tokyo Inst Technol, Dept Mech & Aerosp Engn, Meguro Ku, Tokyo 1528550, Japan
[3] Nippon Felt Co Ltd, Konosu, Saitama 3650043, Japan
来源：
SEN-I GAKKAISHI | 2011年 / 67卷 / 05期
关键词：
SHORT CARBON-FIBER; ABRASIVE WEAR; TRIBOLOGICAL PROPERTIES; EPOXY NANOCOMPOSITES; FRICTION;
D O I：
10.2115/fiber.67.109
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
The abrasive wear rate, the coefficient of friction, and the tensile properties have been investigated on the polyamide 6 (PA6) fibers added with titanium carbide particles (TCP's), aluminum borate whiskers (ABW's) and vapor-grown carbon fibers (VGCF's). The wear rate of the fibers has been determined using a method previously proposed by the present authors. All the fillers used in this study effectively increased the wear resistance of the PA6 fiber. The effect of the fillers to increase the wear resistance of the fiber was analyzed in relation to the changes in the microhardness, the resistance against sliding and the fracture toughness against abrasive wear. The rolling effect of the fillers having a small aspect ratio was recognized from the decrease in the resistance against sliding.
引用
收藏
页码：109 / 118
页数：10
相关论文
共 50 条
  • [31] Polyamide 6 Fibers with Superior Mechanical Properties : TPU Coating Techniques
    John, Baiju
    Motokucho, Suguru
    Kojio, Ken
    Furukawa, Mutsuhisa
    [J]. SEN-I GAKKAISHI, 2009, 65 (09) : 236 - 240
  • [32] Drawing and ultimate tenacity properties of polyamide 6/attapulgite composite fibers
    Tsai, Fang-Chang
    Li, Peng
    Liu, Zhi-Wei
    Feng, Gang
    Zhu, Ping
    Wang, Chuen-Kai
    Chen, Kan-Nan
    Huang, Chi-Yuan
    Yeh, Jen-taut
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 126 (06) : 1906 - 1916
  • [33] Preparation and properties of polyamide 6 fibers prepared by the gel spinning method
    Jia, Qing-Xiu
    Xiong, Zu-Jiang
    Shi, Chao-Ming
    Zhang, Li-Qun
    Wang, Xiao-Ning
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 124 (06): : 5165 - 5171
  • [34] Tensile properties and wear resistance of epoxy nanocomposites reinforced with cellulose nanofibers
    Thipsirin Wongjaiyen
    Witold Brostow
    Wunpen Chonkaew
    [J]. Polymer Bulletin, 2018, 75 : 2039 - 2051
  • [35] Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites
    Karsli, Nevin Gamze
    Aytac, Ayse
    [J]. COMPOSITES PART B-ENGINEERING, 2013, 51 : 270 - 275
  • [36] Tensile properties and wear resistance of epoxy nanocomposites reinforced with cellulose nanofibers
    Wongjaiyen, Thipsirin
    Brostow, Witold
    Chonkaew, Wunpen
    [J]. POLYMER BULLETIN, 2018, 75 (05) : 2039 - 2051
  • [37] Influence of the amorphous phase molecular mobility on impact and tensile properties of polyamide 6,6
    de Anda, Agustin Rios
    Fillot, Louise-Anne
    Long, Didier R.
    Sotta, Paul
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2016, 133 (21)
  • [38] Multiwalled carbon nanotube pretreatment to enhance tensile properties, process stability, and filler dispersion of polyamide 66 nanocomposites
    Kang, Seonku
    Kim, Jongwon
    Park, Jong Hyuk
    Jung, Inhwa
    Park, Min
    [J]. COMPOSITES PART B-ENGINEERING, 2020, 198
  • [39] Neural network based prediction on mechanical and wear properties of short fibers reinforced polyamide composites
    Jiang, Zhenyu
    Gyurova, Lada
    Zhang, Zhong
    Friedrich, Klaus
    Schlarb, Alois K.
    [J]. MATERIALS & DESIGN, 2008, 29 (03) : 628 - 637
  • [40] Evaluation of the Abilities of Ozone Resistance for Polyamide Fibers: Structures, Properties, and Aging Mechanism
    Ren, Hongqing
    He, Zhongchen
    Xu, Jianjun
    Yan, Xiang
    Liu, Pengqing
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2019, 58 (38) : 17814 - 17823
12345