Oxidation resistance of TiAl alloy treated by plasma Nb-C alloying

被引:10
|
作者
Guo, Chaoli [1 ]
Liu, Xiaoping [1 ,2 ]
Ben, Haifeng [1 ]
He, Zhiyong [1 ]
机构
[1] Taiyuan Univ Technol, Res Inst Surface Engn, Taiyuan 030024, Peoples R China
[2] Univ Sci & Technol Beijing, Dept Mat Phys & Chem, Beijing 100083, Peoples R China
来源
SURFACE & COATINGS TECHNOLOGY | 2008年 / 202卷 / 09期
基金
中国国家自然科学基金;
关键词
TiAl alloy; plasma alloying; plasma carburization; oxidation resistance;
D O I
10.1016/j.surfcoat.2007.07.086
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
in this paper, the duplex treatment of plasma surface niobizing and carburization (Nb-C alloyed or duplex treated) has been performed on TiAl substrates. Cyclic-oxidation tests for untreated and duplex treated TiAl were carried out in static air at 900 degrees C for 103 h. The mass gain due to oxidation was measured using an electrobalance. The chemical compositions of the Nb-C alloyed layer as well as its microstructure were examined by glow discharge spectrum (GDS) and the optical microscopy (OM). The electronic diffraction spectrum (EDS) and scanning electronic microscopy (SEM) were used to analyze and observe the oxide layers. The phase structures of the oxide scale were identified by X-ray diffraction (XRD). The results show that the oxidation rate of the duplex treated TiAl specimens decreased significantly, compared with the untreated TiAl. The roles of duplex treatment for improving the oxidation resistance are discussed. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:1797 / 1801
页数:5
相关论文
共 50 条
  • [31] Oxidation behavior of TiAl-8Nb turbine blade alloy
    Teng, Lidong
    Nakatomi, Daisuke
    Seetharaman, Seshadri
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2007, 38 (03): : 477 - 484
  • [32] HIGH TEMPERATURE OXIDATION BEHAVIOUR OF TiAl8Nb ALLOY
    Przybylski, K.
    Prazuch, J.
    Brylewski, T.
    Durda, E.
    ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (02) : 477 - 480
  • [33] Oxidation Behavior of TiAl-8Nb Turbine Blade Alloy
    Lidong Teng
    Daisuke Nakatomi
    Seshadri Seetharaman
    Metallurgical and Materials Transactions B, 2007, 38 : 477 - 484
  • [34] Influence of carburization on oxidation behavior of High Nb contained TiAl alloy
    Yao, Tianhang
    Liu, Yong
    Liu, Bin
    Song, Min
    Zhao, Kun
    Zhang, Weidong
    He, Yuehui
    SURFACE & COATINGS TECHNOLOGY, 2015, 277 : 210 - 215
  • [35] Effect of plasma niobizing on oxidation resistance of TiAl intermetallics
    Zheng, CL
    Cui, FZ
    Xu, Z
    Xie, XS
    He, ZY
    SURFACE & COATINGS TECHNOLOGY, 2003, 174 : 1014 - 1017
  • [36] Influence of Nb doping on oxidation resistance of γ-TiAl: A first principles study
    Li Hong
    Wang Shao-Qing
    Ye Heng-Qiang
    ACTA PHYSICA SINICA, 2009, 58 (06) : S224 - S229
  • [37] Studies on the oxidation resistance of SiOC glasses coated TiAl alloy
    Bik, M.
    Gil, A.
    Stygar, M.
    Dabrowa, J.
    Jelen, P.
    Dlugon, E.
    Lesniak, M.
    Sitarz, M.
    INTERMETALLICS, 2019, 105 : 29 - 38
  • [38] Effect of Ni in SiO2 coating on the oxidation resistance of TiAl alloy at 900 °C
    Yan, Hao-Jie
    Meng, Xian-Ze
    Zhuang, Zhao-Tao
    Zhang, Qin-Hao
    Sun, Qing-Qing
    Wu, Lian-Kui
    Cao, Fa -He
    APPLIED SURFACE SCIENCE, 2023, 638
  • [39] Improving the oxidation resistance of TiAl-based alloy by siliconizing
    Liang, W
    Zhao, XG
    SCRIPTA MATERIALIA, 2001, 44 (07) : 1049 - 1054
  • [40] Characterisation and oxidation behaviour of plasma surface alloyed on γ-TiAl alloy
    Chen, Xiaohu
    Ding, Feng
    Zhang, Pingze
    Wei, Dongbo
    Li, Fengkun
    Qiu, Zhongkai
    Wang, Zhangzhong
    Zhu, Xiurong
    Ling, Guoping
    MATERIALS AT HIGH TEMPERATURES, 2021, 38 (02) : 83 - 94