Study on temperature distribution during Friction Stir Welding of 6082 aluminum alloy

被引:4
|
作者
Verma, S. [1 ]
Meenu [1 ]
Misra, J. P. [1 ]
机构
[1] Natl Inst Technol Kurukshetra, Dept Mech Engn, Kurukshetra 136119, Haryana, India
关键词
Aluminium alloys; friction stir welding; temperature distribution; THERMAL HISTORY;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In friction stir welding (FSW) heat is one of the key elements which is generated owing to friction between tool and workpiece. And hence, the study of heat flux characteristic during the process is essential for producing good quality weld. Moreover, life and capability of the tool depend on the heat dissipation throughout the process. The aim of present study is to experimentally explore the distribution of temperature during the friction stirred butt joint of aluminum 6082 plates. Eight L shaped thermocouples are placed at equally distance from the center line to measure the resulting temperature; four thermocouples on advance side (AS) and four on retreating side (RS). The experiment is conducted at constant rotational speed and feed rate and with varying tool tilt angle and dwell time. It is observed that the temperature on advancing side is on higher side as compared to retreating side. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1350 / 1356
页数:7
相关论文
共 50 条
  • [21] Dynamics of temperature distribution during friction stir welding of butt joints of copper and aluminum
    Rzaev, R. A.
    Dzhalmukhambetov, A. U.
    Ismukhambetova, A. S.
    Derzhavin, I. M.
    INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE) 2020, 2020, 971
  • [22] Material-flow behavior during friction-stir welding of 6082-T6 aluminum alloy
    Yongxian Huang
    Yaobin Wang
    Long Wan
    Haoshu Liu
    Junjun Shen
    Jorge F. dos Santos
    Li Zhou
    Jicai Feng
    The International Journal of Advanced Manufacturing Technology, 2016, 87 : 1115 - 1123
  • [23] Material-flow behavior during friction-stir welding of 6082-T6 aluminum alloy
    Huang, Yongxian
    Wang, Yaobin
    Wan, Long
    Liu, Haoshu
    Shen, Junjun
    dos Santos, Jorge F.
    Zhou, Li
    Feng, Jicai
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 87 (1-4): : 1115 - 1123
  • [24] Study on properties of aluminum alloy welded by friction stir welding
    Luo, Chuanhong
    Zhang, Jianqiang
    Wen, Jungang
    2019 INTERNATIONAL CONFERENCE ON ADVANCED ELECTRONIC MATERIALS, COMPUTERS AND MATERIALS ENGINEERING (AEMCME 2019), 2019, 563
  • [25] Friction stir welding of aluminum alloy to steel
    Kimapong, K
    Watanabe, T
    WELDING JOURNAL, 2004, 83 (10) : 277S - 282S
  • [26] Friction stir linear welding of an aluminum alloy
    Wong, Jerry
    Zambran, Patricia
    Escamilla, Indira
    Gonzalez, Bernardo
    Mucino, Victor
    Colas, Rafael
    ADVANCES IN SEMICONDUCTING MATERIALS, 2009, 68 : 116 - +
  • [27] Friction stir welding of antirust aluminum alloy
    Liu, Xiao-Wen
    Xue, Jingkai
    Ma, Caixia
    Hanjie Xuebao/Transactions of the China Welding Institution, 2009, 30 (05): : 33 - 36
  • [28] Analysis of the Structure and Temperature Distribution in a Duralumin Alloy Weld during Friction Stir Welding
    Kazantseva, N. V.
    Shchapov, G. V.
    Tsarkov, A. V.
    Ezhov, I. V.
    PHYSICS OF METALS AND METALLOGRAPHY, 2024, 125 (09): : 1008 - 1018
  • [29] Finite Element Simulation of Temperature and Strain Distribution during Friction Stir Welding of AA2024 Aluminum Alloy
    Jain R.
    Pal S.K.
    Singh S.B.
    Journal of The Institution of Engineers (India): Series C, 2017, 98 (1) : 37 - 43
  • [30] Effect of peak temperature during friction stir welding on microstructure evolution of aluminum alloy 1050
    Inagaki, K.
    Mironov, S.
    Sato, Y. S.
    Fujii, H. T.
    Kokawa, H.
    PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, 2013, : 41 - 44