Comparative study on axial load capacity of PFCC column-beam joints with two different connection configurations

被引:0
|
作者
Fang, Yuan [1 ]
Yu, Feng [1 ]
Qian, Yuandi [1 ,2 ]
Bai, Rui [3 ]
Song, Zekang [1 ]
Zhu, Defeng [1 ]
Li, Dongang [1 ]
机构
[1] Anhui Univ Technol, Dept Civil Engn & Architecture, Maanshan 243032, Anhui, Peoples R China
[2] China MCC17 Grp Co Ltd, Technol Ctr, Maanshan 243000, Anhui, Peoples R China
[3] Hong Kong Polytech Univ, Dept Civil & Environm Engn, Hung Hom, Kowloon, Hong Kong 999077, Peoples R China
基金
中国国家自然科学基金;
关键词
beam-column joint; failure mode; load capacity; PVC-FRP confined concrete; unified formula; CONFINED CONCRETE COLUMNS; STEEL TUBULAR COLUMN; SEISMIC BEHAVIOR; CFST COLUMNS; COMPRESSIVE BEHAVIOR; PERFORMANCE; STRENGTH; SYSTEM; TESTS; MODEL;
D O I
10.12989/acc.2022.14.4.279
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In this study, seventeen PVC-FRP confined Concrete (PFCC) column-beam joints including eight PFCC column -enlarged ring beam (ERB) joints and nine PFCC column-beam joints strengthened with Core Steel Tube (CST) are designed and tested. The failure modes, ultimate load capacity, deformation capacity of two different types of joints is compared and analyzed. The test results demonstrate that the failure processes of two different types of joints are basically similar, experiencing the elastic, crack development, yield and failure phases. Comparatively, the PFCC column-ERB joints enter the yield phase relatively earlier than the joints strengthened with CST. Both of the connection configurations can effectively constraint the concrete at the joints and significantly improve load capacity, showing their respective advantages. From the point of view of improving the connection efficiency of the joints, increasing ring beam width has the most obvious effect on the PFCC column-ERB joints, while reasonably reducing the height of joint has the greatest influence on the joints strengthened with CST. The axial equivalent ultimate strains of these two different types of joints are much higher than the ultimate compressive strains of ordinary concrete, indicating that both of the connection configurations can remarkably enhance the deformation capacity of the joints. By comparison, the deformation resistances of the PFCC column-ERB joints are greater than those of the joints strengthened with CST. In addition, taking into account the scale effect, a comprehensive influence coefficient of the joints is introduced, and a unified formula for estimating the axial load capacities of the two different joints is proposed based on a modified superposition approach and validates the test data of this paper and other references with good agreement.
引用
收藏
页码:279 / 289
页数:11
相关论文
共 50 条
  • [31] Fire resistance and flexural load capacity of beam-column welded-bolted hybrid connection joints under post-earthquake fire
    Xu, Jixiang
    Chong, Xinda
    Han, Jianping
    STRUCTURES, 2024, 62
  • [32] Cyclic behavior of strong beam-weak column joints strengthened with different configurations of CFRP sheets
    Ilia, Elaheh
    Mostofinejad, Davood
    Moghaddas, Amirreza
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2020, 20 (02)
  • [33] Shear capacity estimation of core steel tube reinforced PCCC column-beam interior joint under quasi-static load
    Fang, Yuan
    Yu, Feng
    Feng, Chaochao
    Chen, Xing
    Tan, Siyong
    ADVANCES IN STRUCTURAL ENGINEERING, 2023, 26 (09) : 1696 - 1713
  • [34] Experimental study on static load-carrying capacity of stainless steel end-plate beam-to-column joints
    Yuan, Huanxin
    Gao, Jundong
    Du, Xinxi
    Yan, Gang
    Jiang, Qinglin
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2021, 42 (12): : 125 - 132
  • [35] Effect of High Axial Load on Seismic Behavior of Reinforced Concrete Beam-Column Joints with and without Strengthening
    Li, Bo
    Lam, Eddie Siu-Shu
    Wu, Bo
    Wang, Ya-yong
    ACI STRUCTURAL JOURNAL, 2015, 112 (06) : 713 - 723
  • [36] Experimental and numerical investigations of seismic performance of stepped beam-column joints with different connection forms
    Cheng, Xin
    Li, Yun
    An, Yi
    Liu, Jianfei
    Zhang, Ruibin
    Liao, Fangfang
    JOURNAL OF BUILDING ENGINEERING, 2024, 91
  • [37] Seismic performance of concrete-encased CFST column to steel beam joints with different connection details
    Li, Wei
    Xu, Li-Feng
    Qian, Wei-Wu
    ENGINEERING STRUCTURES, 2020, 204
  • [38] NUMERICAL STUDY OF SIMPLE AND RIGID BEAM-COLUMN JOINTS SUBJECT TO IMPACT LOAD
    Chen, K.
    Tan, K. H.
    Yang, B.
    STEEL AND ALUMINIUM STRUCTURES, 2016,
  • [39] Experimental study on the seismic behavior of precast concrete beam-column joints with connection defects
    Cao Z.-J.
    Li Q.-W.
    Gongcheng Lixue/Engineering Mechanics, 2021, 38 (11): : 134 - 146and159
  • [40] A study on the safety of the shear capacity design of reinforced concrete beam-column joints
    Lu, W. -Y.
    JOURNAL OF MECHANICS, 2006, 22 (04) : 311 - 320