Effect of Isothermal Aging on the Magnetic Properties of 1Cr-0.5Mo Steel

被引:0
|
作者
Kim, Min-gi [1 ,2 ]
Ryu, K. S. [1 ]
Lee, Y. H. [1 ]
Park, J. S. [1 ]
Kim, C. G. [2 ]
机构
[1] Korea Res Inst Stand & Sci, Div Ind Metrol, Taejon 305340, South Korea
[2] Chungnam Natl Univ, Dept Mat Engn, Taejon 305340, South Korea
关键词
1Cr-0.5Mo steel; coercivity; hysteresis loss; Rockwell hardness; carbide; isothermal aging; 1CR-1MO-0.25V STEEL;
D O I
10.4283/JMAG.2011.16.3.225
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Magnetic properties and Rockwell hardness of 1Cr-0.5Mo steel have been investigated as a function of isothermal aging time. Our results showed that coercivity, hysteresis loss and Rockwell hardness in the aged samples decreased as aging time increased. This phenomenon was analyzed using optical microscopy and scanning electron microscopy. A significant diffusion of Cr and Mo atoms formed M(2)C and M(7)C carbides, lowering the matrix strength. M(2)C and M(7)C carbides partially segregated inside grains, diffused into grain boundaries, and finally resulted in a soft ferrite matrix and a hard grain boundary. The magnetic and mechanical softening of the matrix is likely to govern the properties of the sample more than the hardening of the grain boundary by carbide precipitations.
引用
收藏
页码:225 / 228
页数:4
相关论文
共 50 条
  • [31] DECARBURIZATION AND THERMAL AGING - THEIR EFFECT UPON 2 1/4Cr-1Mo STEEL MECHANICAL PROPERTIES.
    Wozadlo, G.P.
    Hampton, L.V.
    Roy, P.
    Proceedings of the Annual Reliability and Maintainability Symposium, 1980, 1 : 1 - 2
  • [32] Magnetic properties evaluation of ageing behaviour in water-quenched 5Cr-0.5Mo steel
    Mohapatra, J. N.
    Panda, A. K.
    Mitra, A.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2009, 42 (09)
  • [33] IMPACT PROPERTIES OF 9CR-1MO-V-NB STEEL AFTER AGING
    TACHIBANA, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S499 - S499
  • [34] STABILIZATION OF PROPERTIES OF HEAVY SECTION 11/4CR-0.5MO STEEL PLATES .2. EFFECT OF MINOR ALLOYING ELEMENTS ON MECHANICAL-PROPERTIES OF 11/4CR-0.5MO STEEL
    TSUYAMA, S
    TAGAWA, H
    ICHINOSE, H
    TOKUNAGA, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1982, 22 (07) : B212 - B212
  • [35] Microstructure and oxidation properties of 9Cr-1.7W-0.4Mo-Co ferritic steel after isothermal aging
    Gao, Qiuzhi
    Dong, Xin
    Li, Chao
    Lin, Zhixiang
    Yang, Xiaxia
    Dai, Mei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 651 : 537 - 543
  • [37] The comparison of fatigue crack growth behaviors for long term used and heat treated 1Cr-0.5Mo steel under various load frequencies and temperature
    Jang, SY
    Nahm, SH
    Suh, CM
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2003, 17 (8-9): : 1640 - 1645
  • [38] Cyclic and isothermal oxidation behavior of 2.25Cr-1Mo steel
    Proy, Manuel
    Victoria Utrilla, Maria
    Otero, Enrique
    REVISTA DE METALURGIA, 2014, 50 (01)
  • [39] THE EFFECT OF A LONG PERIOD OF HIGH-TEMPERATURE AGING ON THE SERVICE PROPERTIES OF 15CR1MO1V STEEL
    SMIRNOVA, AP
    MINTS, II
    SHTEINBERG, MM
    THERMAL ENGINEERING, 1985, 32 (06) : 322 - 324
  • [40] Effect of Alloying Elements and Microstructure on the Dynamic Strain Aging Behavior of 1.25Cr-0.5Mo and 2.25Cr-1Mo Steels
    Lee, Yo Seob
    Lee, Ho Jung
    Lee, Jong Hyeon
    KOREAN JOURNAL OF METALS AND MATERIALS, 2021, 59 (11): : 769 - 780