Shape memory characteristics of (TiZrHf)50Ni25Co10Cu15 high entropy shape memory alloy

被引：89
|
作者：
Chen, Chih-Hsuan [1 ]
Chen, Yue-Jin [1 ]
机构：
[1] Natl Taiwan Univ, Dept Mech Engn, Taipei 106, Taiwan
来源：
SCRIPTA MATERIALIA | 2019年 / 162卷
关键词：
High entropy alloy; Shape memory alloys (SMA); Martensitic phase transformation; Differential scanning calorimetry (DSC); X-ray diffraction (XRD); SOLID-SOLUTION; LATTICE;
D O I：
10.1016/j.scriptamat.2018.11.023
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A homogenized (TiZrHf)(50)Ni25Co10Cu15 high entropy shape memory alloy (HESMA) was studied to investigate its transformation behavior and shape memory effect. After solution treatment at 1000 degrees C, the (TiZrHf)(50)Ni(25)Co(10)Cu(15)HESMA still contained Ti2Ni-like second phase and (Ti, Zr, Hf) carbide, and thus was not a single solid solution. It exhibited a broad transformation temperature range with M-s = 36.0 degrees C and M-f = -80.4 degrees C. In a three-point bending test, the (TiZrHf)(50)Ni25Co10Cu15 HESMA showed a reversible strain of 4.8% under 650 MPa, which is similar to the performance of Ti50Ni50 alloy but with a much higher output work density. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：185 / 189
页数：5
相关论文
共 50 条
  • [41] Phase transformation and shape memory effect of a Cu-Al-Ni-Mn-Nb high temperature shape memory alloy
    Mazzer, E. M.
    Kiminami, C. S.
    Bolfarini, C.
    Cava, R. D.
    Botta, W. J.
    Gargarella, P.
    Audebert, F.
    Galano, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 663 : 64 - 68
  • [42] Effect of Annealing on Shape Memory Effect of Ti50Ni25Cu25 Ribbon
    Tong, Yun-xiang
    Liu, Yong
    Chen, Feng
    Zheng, Yu-feng
    PROCEEDINGS OF THE 7TH NATIONAL CONFERENCE ON CHINESE FUNCTIONAL MATERIALS AND APPLICATIONS (2010), VOLS 1-3, 2010, : 799 - +
  • [43] Shape memory characteristics of Ti49.5Ni25Pd25Sc0.5 high-temperature shape memory alloy after severe plastic deformation
    Atli, K. C.
    Karaman, I.
    Noebe, R. D.
    Garg, A.
    Chumlyakov, Y. I.
    Kireeva, I. V.
    ACTA MATERIALIA, 2011, 59 (12) : 4747 - 4760
  • [44] SHAPE MEMORY EFFECT IN A CU-A1-NI ALLOY
    SARMA, B
    BALASUBRAMANIAN, V
    RAY, KK
    SCRIPTA METALLURGICA, 1972, 6 (09): : 869 - +
  • [45] Mechanical and shape memory properties of Ni54Mn25Ga21 high-temperature shape memory alloy
    Li, Yan
    Xin, Yan
    Jiang, Chengbao
    Xu, Huibin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 438 : 978 - 981
  • [46] Crystallization of Mechanically Alloyed Ni50Ti50 and Ti50Ni25Cu25 Shape Memory Alloys
    Piotr Salwa
    Tomasz Goryczka
    Journal of Materials Engineering and Performance, 2020, 29 : 2848 - 2852
  • [47] Crystallization of Mechanically Alloyed Ni50Ti50 and Ti50Ni25Cu25 Shape Memory Alloys
    Salwa, Piotr
    Goryczka, Tomasz
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (05) : 2848 - 2852
  • [48] EFFECT OF THERMOMECHANICAL TREATMENT ON SHAPE MEMORY CHARACTERISTICS IN A TI-40NI-10CU (AT PERCENT) ALLOY
    NAM, TH
    SABURI, T
    SHIMIZU, K
    MATERIALS TRANSACTIONS JIM, 1991, 32 (09): : 814 - 820
  • [49] Transformation behavior and shape memory characteristics of Ti-40Ni-10Cu(at.%) alloy ribbons
    Nam, J. M.
    Cho, G. B.
    Ahn, H. J.
    Kim, Y. W.
    Nam, T. H.
    PHYSICA SCRIPTA, 2007, T129 : 255 - 260
  • [50] Martensite transformation and shape memory properties of Ni49Ti36Hf15 high temperature shape memory alloy
    Liu, Li-Hua
    Zheng, Yu-Feng
    Wang, Li-Ming
    Cai, Wei
    Zhao, Lian-Cheng
    Gongneng Cailiao/Journal of Functional Materials, 2003, 34 (01): : 48 - 50
12345