30 and 83 GHz millimeter wave sintering of alumina

被引:20
|
作者
Sano, S
Makino, Y
Miyake, S
Bykov, YV
Eremeev, AG
Egorov, SV
机构
[1] Natl Ind Res Inst Nagoya, Kita Ku, Nagoya, Aichi 4628510, Japan
[2] Osaka Univ, Joining & Welding Res Inst, Ibaraki, Osaka 5670047, Japan
[3] Russian Acad Sci, Inst Appl Phys, Nizhnii Novgorod 603600, Russia
关键词
Millimeter wave sintering;
D O I
10.1023/A:1006733125930
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Scanning electron microscope observation of the fracture surfaces of millimeter wave sintered alumina was carried out. The millimeter wave sintering produced a high-strength and high-hardness materials. Alumina bodies sintered by a 30 and 83 GHz millimeter wave showed fine grains of a few microns though the conventionally sintered body has rather grown grains. The density of conventionally sintered body and the millimeter wave sintered bodies are almost same. The bending strength of the conventionally sintered was 400 GPa whereas the millimeter wave sintered bodies were 600 GPa. The Vickers hardness of millimeter wave was about 1800 in contrast, the conventionally sintered alumina was less than 1500.
引用
收藏
页码:2247 / 2250
页数:4
相关论文
共 50 条
  • [1] Comparative study of microwave sintering of zinc oxide at 2.45, 30, and 83 GHz
    Birnboim, A
    Gershon, D
    Calame, J
    Birman, A
    Carmel, Y
    Rodgers, J
    Levush, B
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1998, 81 (06) : 1493 - 1501
  • [2] Chipless Millimeter Wave Identification (MMID) Tag at 30 GHz
    Preradovic, Stevan
    Karmakar, Nemai
    2011 41ST EUROPEAN MICROWAVE CONFERENCE, 2011, : 123 - 126
  • [3] Millimeter-wave sintering of high pure alumina - Microstructure and mechanical properties
    Makino, Y
    Miyake, S
    Sano, S
    Saito, H
    Kyoh, B
    Kuwahara, H
    Yoshikawa, A
    ADVANCES IN MICROWAVE AND RADIO FREQUENCY PROCESSING, 2006, : 570 - +
  • [4] A study of millimeter-wave sintering of fine-grained alumina compacts
    Fliflet, AW
    Bruce, RW
    Fischer, RP
    Lewis, D
    Kurihara, LK
    Bender, BA
    Chow, GM
    Rayne, RJ
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2000, 28 (03) : 924 - 935
  • [5] SOLID-STATE REACTIVE SINTERING OF POLYCRYSTALLINE ND:YAG CERAMIC LASER HOST MATERIALS USING AN 83 GHZ MILLIMETER WAVE SYSTEM
    Bruce, Ralph W.
    Stephenson, Chad A.
    Fliflet, Arne W.
    Gold, Steven B.
    Imam, M. Ashraf
    ADVANCED PROCESSING AND MANUFACTURINGTECHNOLOGIES FOR STRUCTURAL AND MULTIFUNCTIONAL MATERIALS III, 2010, 30 (08): : 1 - +
  • [6] GSFC 20 AND 30 GHZ MILLIMETER WAVE-PROPAGATION EXPERIMENT
    IPPOLITO, LJ
    IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, 1975, 11 (05) : 977 - 977
  • [7] A Tunable Ferrite Isolator for 30 GHz Millimeter-Wave Applications
    Noferesti, Moein
    Djerafi, Tarek
    IEEE TRANSACTIONS ON MAGNETICS, 2021, 57 (07)
  • [8] Near Field Measurement and Analysis of Millimeter Wave at 20GHz and 30GHz
    Park, Jungkuy
    Choi, Sol
    Cho, KyungRyong
    2022 14TH GLOBAL SYMPOSIUM ON MILLIMETER-WAVES & TERAHERTZ (GSMM 2022), 2022, : 164 - 165
  • [9] Microwave sintering of alumina at 2.45 GHz
    Brosnan, KH
    Messing, GL
    Agrawal, DK
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2003, 86 (08) : 1307 - 1312
  • [10] Millimeter wave sintering of ceramics
    Ritzhaupt-Kleissl, HJ
    Link, G
    CFI-CERAMIC FORUM INTERNATIONAL, 1999, 76 (1-2): : 28 - 32