Scratch-resistant anticorrosion sol-gel coating for the protection of AZ31 magnesium alloy via a low temperature sol-gel route

被引：100
|
作者：
Wang, Heming [1 ]
Akid, Robert [1 ]
Gobara, Mohamed [1 ]
机构：
[1] Sheffield Hallam Univ, Mat & Engn Res Inst, Sheffield S1 1WB, S Yorkshire, England
来源：
CORROSION SCIENCE | 2010年 / 52卷 / 08期
关键词：
AZ31; Magnesium alloy; Polyaniline; Sol-gel coating; Corrosion protection; CORROSION PROTECTION; PERFORMANCE; BEHAVIOR;
D O I：
10.1016/j.corsci.2010.04.002
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A novel hybrid sol-gel/polyaniline coating has been developed for application onto an AZ31 magnesium alloy for corrosion protection. Electrochemical Impedance Spectroscopy in 3.5 wt% NaCl and diluted Harrison's solutions, along with salt spray tests showed that the coating possesses excellent corrosion resistance. The hybrid coating was modified by doping with silica nanoparticles (for scratch resistance) and cured at a low temperature of 75 degrees C. Whilst conventional sol-gel methods tend to limit the coating thickness values up to 10 mu m, the new hybrid sol-gel/polyaniline system presented here allows thick coatings to be deposited, in this case, around 50-60 mu m. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2565 / 2570
页数：6
相关论文
共 50 条
  • [31] Scratch-resistant improvement of sol-gel derived nano-porous silica films
    Wang, J
    Wu, GM
    Shen, J
    Yang, TH
    Zhang, QY
    Zhou, B
    Deng, ZS
    Fan, B
    Zhou, DP
    Zhang, FS
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2000, 18 (03) : 219 - 224
  • [32] Composite anticorrosion coatings for AZ91D magnesium alloy with molybdate conversion coating and silicon sol-gel coatings
    Hu, Junying
    Li, Qing
    Zhong, Xiankang
    Zhang, Liang
    Chen, Bo
    PROGRESS IN ORGANIC COATINGS, 2009, 66 (03) : 199 - 205
  • [33] Anticorrosion Properties of a Novel Hybrid Sol-Gel Coating on Aluminum 3003 Alloy
    Suleiman, Rami K.
    Adesina, Akeem Y.
    Kumar, Arumugam Madhan
    Rahman, Mohammad Mizanur
    Al-Badour, Fadi A.
    El Ali, Bassam
    POLYMERS, 2022, 14 (09)
  • [34] Low temperature preparation of hydroxyapatite coatings on titanium alloy by a sol-gel route
    Weng, WJ
    Shen, G
    Han, GR
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2000, 19 (24) : 2187 - 2188
  • [35] In vitro degradation of AZ31 magnesium alloy coated with nano TiO2 film by sol-gel method
    Hua, Junhua
    Zhang, Caili
    Cui, Baohong
    Bai, Kuifeng
    Guan, Shaokang
    Wang, Liguo
    Zhu, Shijie
    APPLIED SURFACE SCIENCE, 2011, 257 (21) : 8772 - 8777
  • [36] Self-Healing Corrosion Protection Coatings Obtained by Anodization and Sol-Gel Process on Mg AZ31 Alloy
    Kumar, K. Pradeep Prem
    Raju, K. R. C. Soma
    Subasri, R.
    PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 2022, 58 (04) : 856 - 871
  • [37] Sol-gel coatings of low sintering temperature for corrosion protection of ZE41 magnesium alloy
    Lopez, A. J.
    Rams, J.
    Urena, A.
    SURFACE & COATINGS TECHNOLOGY, 2011, 205 (17-18): : 4183 - 4191
  • [38] Anatase coating on NiTi via a low-temperature sol-gel route for improving corrosion resistance
    Cheng, FT
    Shi, P
    Man, HC
    SCRIPTA MATERIALIA, 2004, 51 (11) : 1041 - 1045
  • [39] Low Temperature Sol-Gel Processed Photocatalytic Titania Coating
    Walid A. Daoud
    John H. Xin
    Journal of Sol-Gel Science and Technology, 2004, 29 : 25 - 29
  • [40] Low temperature sol-gel processed photocatalytic titania coating
    Daoud, WA
    Xin, JH
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2004, 29 (01) : 25 - 29
12345