Heat and mass transfer simulations of the absorption process in a packed bed absorber

被引：12
|
作者：
Westerlund, L [1 ]
Dahl, J [1 ]
Hermansson, R [1 ]
机构：
[1] Lulea Univ Technol, Dept Mech Engn, Div Energy Engn, S-95187 Lulea, Sweden
来源：
APPLIED THERMAL ENGINEERING | 1998年 / 18卷 / 12期
关键词：
open absorption system; dehumidifying; dryers; multiphase flow simulations;
D O I：
10.1016/S1359-4311(98)00011-8
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Numerical modelling of the absorption process in a cross-current absorber has been performed with FLOW3D, a commercially available software. The simulations are verified by comparisons with experimental results. The modelling of mass and heat transfer is discussed. Comparisons regarding the overall capacity as well as transfer rates show good agreement between experiments and simulations. It is possible to model the mass and heat transfer for a cross-current absorber if the equilibrium line for the absorption solution is known. (C) 1998 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：1295 / 1308
页数：14
相关论文
共 50 条
  • [41] Effectiveness of heat and mass transfer processes in a packed bed liquid desiccant dehumidifier/regenerator
    Martin, V
    Goswami, DY
    HVAC&R RESEARCH, 2000, 6 (01): : 21 - 39
  • [42] Heat and mass transfer in a shell-coil type absorber of ammonia absorption heat pump
    Kim, SC
    Yun, JH
    Oh, MD
    Lee, JH
    HEAT TRANSFER 1998, VOL 6: GENERAL PAPERS, 1998, : 287 - 292
  • [43] Modeling and validation of heat and mass transfer in a direct contact packed bed crossflow humidifier
    Bihani, Raghav
    Tan, Xu
    Saha, Parnab
    Abedi, Mahyar
    Klausner, James
    Benard, Andre
    APPLIED THERMAL ENGINEERING, 2025, 268
  • [44] Analysis of heat and mass transfer of the falling film absorber in the open cycle absorption heat pump
    Wei, Fan
    Xiao, Yunhan
    Zhang, Shijie
    Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2009, 30 (05): : 591 - 595
  • [45] Heat and mass transfer in a packed bed reactor for calcium oxide/carbon dioxide chemical heat pump
    Li, GZ
    Kanie, T
    Kato, Y
    Yoshizawa, Y
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2002, 35 (09) : 886 - 892
  • [46] Comparison between heat transfer and heat mass transfer models for transportation process in an adsorbent bed
    Yong, L
    Sumathy, K
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2004, 47 (8-9) : 1587 - 1598
  • [47] OPTIMAL-CONTROL OF HEAT-TRANSFER AND MASS-TRANSFER PROCESSES IN PACKED-BED
    ANDREEV, NV
    GALCHINSKIJ, LJ
    DOPOVIDI AKADEMII NAUK UKRAINSKOI RSR SERIYA A-FIZIKO-MATEMATICHNI TA TECHNICHNI NAUKI, 1978, (10): : 919 - 921
  • [48] Modeling of heat transfer in a moving packed bed: Case of the preheater in nickel carbonyl process
    Henda, R
    Falcioni, DJ
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2006, 73 (01): : 47 - 53
  • [49] CFD modeling of gas-liquid mass transfer process in a rotating packed bed
    Yang, Yucheng
    Xiang, Yang
    Chu, Guangwen
    Zou, Haikui
    Sun, Baochang
    Arowo, Moses
    Chen, Jian-Feng
    CHEMICAL ENGINEERING JOURNAL, 2016, 294 : 111 - 121
  • [50] Absorption of Carbon Dioxide with Ionic Liquid in a Rotating Packed Bed Contactor: Mass Transfer Study
    Zhang, Liang-Liang
    Wang, Jie-Xin
    Xiang, Yang
    Zeng, Xiao-Fei
    Chen, Jian-Feng
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2011, 50 (11) : 6957 - 6964
12345