Corner compensation mask design on (MEMS) accelerometer structure

被引：0
|
作者：
Yusof, Norliana [1 ]
Noorakma, Abdullah C. W. [1 ]
Soin, Norhayati [2 ]
机构：
[1] Univ Sultan Zainal Abidin, Fac Design Arts & Engn Technol, Kuala Terengganu 21300, Terengganu, Malaysia
[2] Univ Malaya, Fac Engn, Dept Elect Engn, Kuala Lumpur 50603, Malaysia
来源：
2014 IEEE INTERNATIONAL CONFERENCE ON SEMICONDUCTOR ELECTRONICS (ICSE) | 2014年
关键词：
Convex Corner Undercutting; Accelerometer; Intellisuite CAD simulation; Compensation mask; Etching; SILICON;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This paper presents the analysis effect of etching temperature and KOH concentration on convex corner undercutting of (MEMS) accelerometer structure. The Intellisuite CAD simulation software was used for the simulation analysis. From the analysis it was found that the optimum etching condition for this convex corner was at 25 wt% KOH concentration and 63 degrees C etching temperature. Different types of compensation mask corners were designed which are corner, square and triangle in order to study the undercutting phenomena. In this case, the square corner compensation mask was chosen as it shown the most suitable compensation mask for this design of accelerometer. The etching simulation was continued with square corner compensation mask etched in the optimized temperature and KOH concentration and it indicated that the square corner compensation mask is the most suitable mask to solve the convex corner undercutting for this accelerometer structure.
引用
收藏
页码：248 / 251
页数：4
相关论文
共 50 条
  • [21] Design and Analysis of Serpentine Based MEMS Accelerometer
    Sudha, Karbari R.
    Uttara, Kumari
    Roshan, Pasha C.
    Vikas, Gowda K.
    INTERNATIONAL CONFERENCE ON INVENTIVE RESEARCH IN MATERIAL SCIENCE AND TECHNOLOGY (ICIRMCT 2018), 2018, 1966
  • [22] SIMULATION STUDY OF CONVEX CORNER UNDERCUTTING IN KOH AND TMAH FOR A MEMS PIEZORESISTIVE ACCELEROMETER
    Yusof, Norliana
    Soin, Norhayati
    Noorakma, Abdullah C. W.
    JURNAL TEKNOLOGI, 2016, 78 (06): : 69 - 76
  • [23] The design and test of a high g MEMS accelerometer
    Xi, ZW
    Nie, WR
    Li, W
    Wang, J
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2005, VOLS 1 AND 2, 2005, : 1428 - 1430
  • [24] Design of a plane inclinometer based on MEMS accelerometer
    Guo Qinglei
    Liang Huawei
    Miao Shifu
    Huang Jian
    2007 INTERNATIONAL CONFERENCE ON INFORMATION ACQUISITION, VOLS 1 AND 2, 2007, : 321 - +
  • [25] Design of a Capacitive MEMS Accelerometer with Softened Beams
    Wang, Chenggang
    Hao, Yongcun
    Sun, Zheng
    Zu, Luhan
    Yuan, Weizheng
    Chang, Honglong
    MICROMACHINES, 2022, 13 (03)
  • [26] A FUZZY LOGIC CONTROL STRUCTURE OF A MEMS ACCELEROMETER
    Grigorie, Teodor Lucian
    Negrea, Petre
    Corcau, Jenica Ileana
    Dinca, Liviu
    Grigorie, Otilia
    GEOCONFERENCE ON NANO, BIO AND GREEN - TECHNOLOGIES FOR A SUSTAINABLE FUTURE, 2013, : 3 - 10
  • [27] Single-Mask Field Emsission Based Tunable MEMS Tunneling Accelerometer
    Kumar, Varun
    Guo, Xiaobo
    Pourkamali, Siavash
    2015 IEEE 15TH INTERNATIONAL CONFERENCE ON NANOTECHNOLOGY (IEEE-NANO), 2015, : 1171 - 1174
  • [28] Single-Mask Field Emission Based Tunable MEMS Tunneling Accelerometer
    Kumar, Varun
    Guo, Xiaobo
    Pourkamali, Siavash
    2015 IEEE 15TH INTERNATIONAL CONFERENCE ON NANOTECHNOLOGY (IEEE-NANO), 2015, : 755 - 758
  • [29] High Quality Factor Resonant MEMS Accelerometer With Continuous Thermal Compensation
    Zotov, Sergei A.
    Simon, Brenton R.
    Trusov, Alexander A.
    Shkel, Andrei M.
    IEEE SENSORS JOURNAL, 2015, 15 (09) : 5045 - 5052
  • [30] CAD design of mask compensation patterns
    Tellier, C
    PROCEEDINGS OF THE IEEE SENSORS 2003, VOLS 1 AND 2, 2003, : 517 - 522
12345