Thermodynamic analysis of Fe contamination in Cu-Mo alloys processed by mechanical alloying

被引：3

作者：

Aguilar, C. ^{[1
]}

Medina, A. ^{[2
]}

Hernandez, O. J. ^{[2
]}

Bejar, L. ^{[3
]}

Parra, C. ^{[4
]}

机构：

[1] Univ Tecn Federico Santa Maria, Dept Ingn Met & Mat, Av Espana 1680, Valparaiso 56322654228, Chile

[2] Univ Michoacana, Inst Invest Met & Mat, Morelia, Michoacan, Mexico

[3] Univ Michoacana, Fac Ingn Mecan, Morelia, Michoacan, Mexico

[4] Univ Tecn Federico Santa Maria, Dept Fis, Lab Nanobiomat, Valparaiso, Chile

来源：

PHILOSOPHICAL MAGAZINE LETTERS | 2018年 / 98卷 / 08期

关键词：

Copper alloys; HRTEM; powder metallurgy; thermodynamics; SOLID-SOLUTION; FORMATION ENTHALPIES; PHASE; EXTENSION; BEHAVIOR; MODEL;

D O I：

10.1080/09500839.2018.1552029

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work aims to verify if Fe atoms coming from balls and jars enter into solid solution of Cu-Mo powders during mechanical alloying. The powders were milled and its structure and composition were characterised by scanning and transmission electron microscopy, and X-ray diffraction. Gibbs free of mixing values for Cu-Mo-Fe system were calculated using the Miedema's model and showed that Cu-rich corner exhibit smallest energy values (<10kJmol(-1)). The observed coherency relation Cu(111) || Mo(101) || Fe(101) confirmed formation of solid solution. Fe atoms have entered in solid solution with Cu and Mo and do not remain as particles of second phase.

引用

页码：341 / 349

页数：9

共 50 条

[31] Thermodynamic considerations about the formation of alloys by mechanical alloying
de Lima, JC
dos Santos, VHF
Grandi, TA
D'Ajello, PCT
Dmitriev, A
[J]. PHYSICAL REVIEW B, 2000, 62 (13): : 8871 - 8877
[32] Atomic and magnetic structures of Fe-Cu alloys prepared by mechanical alloying technique
Ino, H
Tokumitsu, K
[J]. JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 1255 - 1258
[33] Incipient chemical instabilities of nanophase Fe-Cu alloys prepared by mechanical alloying
Fultz, B
Ahn, CC
Spooner, S
Hong, LB
Eckert, J
Johnson, WL
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (10): : 2934 - 2946
[34] Magnetoresistance and magnetism in Fe-Cu alloys produced by electrodeposition and mechanical alloying methods
Ueda, Y
Ikeda, S
Mori, Y
Zaman, H
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 217 : 371 - 375
[35] MECHANICAL ALLOYING OF IMMISCIBLE CU(70)TM(30) ALLOYS (TM=FE,CO)
MACRI, PP
ENZO, S
COWLAM, N
FRATTINI, R
PRINCIPI, G
HU, WX
[J]. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 1995, 71 (02): : 249 - 259
[36] Mechanical alloying of Mo-Si-Fe powders
曹昱
易丹青
张松
[J]. Transactions of Nonferrous Metals Society of China, 2002, (04) : 681 - 685
[37] Mechanical alloying of Mo-Si-Fe powders
Cao, Y
Yi, DQ
Zhang, S
[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2002, 12 (04) : 681 - 685
[38] Mechanical alloying in the Fe-Cu system
Jiang, JZ
Gente, C
Bormann, R
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 242 (1-2): : 268 - 277
[39] MECHANICAL ALLOYING IN THE FE-CU SYSTEM
UENISHI, K
KOBAYASHI, KF
NASU, S
HATANO, H
ISHIHARA, KN
SHINGU, PH
[J]. ZEITSCHRIFT FUR METALLKUNDE, 1992, 83 (02): : 132 - 135
[40] Alloying effects on the microstructure and mechanical properties of nanocrystalline Cu-based alloyed thin films: Miscible Cu-Ti vs immiscible Cu-Mo
Zhang, J. Y.
Zhao, J. T.
Li, X. G.
Wang, Y. Q.
Wu, K.
Liu, G.
Sun, J.
[J]. ACTA MATERIALIA, 2018, 143 : 55 - 66

← 1 2 3 4 5 →