A mechanical tuner for the ISAC-II quarter wave superconducting cavities

被引：0

作者：

Ries, T ^{[1
]}

Fong, K ^{[1
]}

Koscielniak, S ^{[1
]}

Laxdal, RE ^{[1
]}

Stanford, G ^{[1
]}

机构：

[1] TRIUMF, Vancouver, BC V6T 2A3, Canada

来源：

PROCEEDINGS OF THE 2003 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-5 | 2003年

关键词：

D O I：

暂无

中图分类号：

O412 [相对论、场论]; O572.2 [粒子物理学];

学科分类号：

摘要：

TRIUMF is developing a new mechanical tuner system capable of both coarse (kHz) and fine (Hz) frequency adjustments for maintaining frequency lock on the superconducting quarter wave cavities of the ISAC-II heavy ion linac. A 1 mm thick Niobium plate at the high field end of the cavity is actuated by a vertically mounted permanent magnet linear servo motor, at the top of the cryostat, using a 'zero backlash' lever and push rod configuration through a bellows feed-through. The system resolution at the tuner plate center is similar to 0.055mum (0.3 Hz) with a dynamic range of 8 KHz and a manual coarse tuning range of 33 kHz. In cold tests with a prototype quarter wave cavity the tuning system's ability to compensate perturbations indicated a bandwidth up to 100 Hz. A large mechanical resonance at 20 Hz should be eliminated in the on-line device. The rf control is based on a self-excited loop with a locking circuit for amplitude and phase regulation. The tuner is fed a position signal integrated from the control loop phase error. Details of the mechanical device and results of open and closed loop cold tests will be given.

引用

页码：1488 / 1490

页数：3

共 50 条

[11] ISAC-I and ISAC-II: Present status and future perspectives
Bricault, P.
EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 2007, 150 (1): : 227 - 232
[12] ISAC-II QWR cavity characterizations and investigations
Laxdal, R. E.
Boussier, B.
Fong, K.
Laverty, M.
Mitra, A. K.
Zviagintsev, V.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2006, 441 (1-2): : 193 - 196
[13] Magnetic field studies in the ISAC-II cryomodule
Laxdal, R. E.
Boussier, B.
Fong, K.
Sekachev, I.
Clark, G.
Zvyagintsev, V.
Eichhorn, R.
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2006, 441 (1-2): : 225 - 228
[14] The production and acceleration of RIBS at ISAC-I and future plans for ISAC-II
Laxdal, RE
APPLICATION OF ACCELERATORS IN RESEARCH AND INDUSTRY, 2003, 680 : 249 - 253
[15] Cold tests of the ISAC-II medium beta cryomodule
Sekachev, I.
Laxdal, R. E.
Stanford, G.
ADVANCES IN CRYOGENIC ENGINEERING, VOLS 51A AND B, 2006, 823 : 913 - +
[16] First cold test of the ISAC-II medium β cryomodule
Sekachev, I.
Laxdal, R. E.
Marshall, C.
Ries, T.
Stanford, G.
ICEC 20: PROCEEDINGS OF THE TWENTIETH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE, 2005, : 79 - 82
[17] EMMA: A recoil mass spectrometer for ISAC-II at TRIUMF
Davids, B
Davids, CN
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2005, 544 (03): : 565 - 576
[18] Mechanical stabilisation of superconducting quarter wave resonators
Facco, A
Zviagintsev, V
PROCEEDINGS OF THE 1997 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-3: PLENARY AND SPECIAL SESSIONS ACCELERATORS AND STORAGE RINGS - BEAM DYNAMICS, INSTRUMENTATION, AND CONTROLS, 1998, : 3084 - 3086
[19] Tuner control in TRIUMF ISAC 2 superconducting RF system
Fong, Ken
Laverty, Mchael
Zheng, Qiwen
2007 IEEE PARTICLE ACCELERATOR CONFERENCE, VOLS 1-11, 2007, : 3803 - 3805
[20] Alignment of the ISAC-II medium β cryomodule with a wire monitoring system
Rawnsley, W. R.
Bylinski, Y.
Fong, K.
Laxdal, R. E.
Dutto, G.
Giove, D.
ICEC 20: PROCEEDINGS OF THE TWENTIETH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE, 2005, : 931 - 934

← 1 2 3 4 5 →