Prediction of material discontinuity and modal analysis of aluminium beam using finite element method

被引：3
|
作者：
Kumar, B. Gokul [1 ]
Velmurugan, V. [1 ]
Paramasivam, V. [2 ]
Thanikaikarasan, S. [3 ]
机构：
[1] Saveetha Univ, Saveetha Sch Engn, Dept Mech Engn, Chennai 602105, Tamil Nadu, India
[2] PSNA Coll Engn & Technol, Dept Mech Engn, Dindigul 624622, Tamil Nadu, India
[3] Saveetha Univ, Saveetha Sch Engn, Dept Sci & Humanities, Div Phys, Chennai 602105, Tamil Nadu, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷
关键词：
Cantilever beam; Discontinuity; Dynamics; Modal; Natural frequency; Convergence;
D O I：
10.1016/j.matpr.2019.07.243
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The component failure in the machine parts that affect the function during its operation is due the fatigue failure and stress due to discontinuities. As an initiative of dynamic analysis of the discontinuity in the envelope a metal beam of aluminum of the recommended size is taken and the test of the beam is carried out by fixing as a cantilever and applying the excitation using the hammer excited, and the behaviour of the beam is recorded as the modal analysis to find the natural frequency and the different mode shapes have been observed using the experimental setup, and same have been verified using the ANSYS software in which the theoretical value can be compared to the experimental value and the convergences' of the results are discussed. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：782 / 786
页数：5
相关论文
共 50 条
  • [41] Method to determine the boundary conditions of the finite element model of a slender beam using measured modal parameters
    Southeast Univ, Nanjing, China
    J Vib Acoust Trans ASME, 3 (474-478):
  • [42] Modal analysis of prestressed draft pad of freight wagons using finite element method
    Sachin Sudhakar Harak
    Satish Chand Sharma
    Suraj Prakash Harsha
    Railway Engineering Science, 2015, (01) : 43 - 49
  • [43] Finite element model updating of masonry minarets by using operational modal analysis method
    Calayir, Yusuf
    Yetkin, Musa
    Erkek, Hakan
    STRUCTURES, 2021, 34 : 3501 - 3507
  • [44] Modal analysis of double-walled carbon nanocones using the finite element method
    Rouhi, S.
    Ansari, R.
    Nickabadi, S.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2017, 31 (32):
  • [45] Modal analysis of prestressed draft pad of freight wagons using finite element method
    Sachin Sudhakar Harak
    Satish Chand Sharma
    Suraj Prakash Harsha
    Journal of Modern Transportation, 2015, 23 (01) : 43 - 49
  • [46] Modal analysis of prestressed draft pad of freight wagons using finite element method
    Harak, Sachin Sudhakar
    Sharma, Satish Chand
    Harsha, Suraj Prakash
    JOURNAL OF MODERN TRANSPORTATION, 2015, 23 (01): : 43 - 49
  • [47] Analysis of hole expansion test of aluminium alloy using finite element method simulation
    Dewang, Yogesh
    Sharma, Vipin
    Mohan, Shashi Ranjan
    Jose, Riyan Cyriac
    INTERNATIONAL JOURNAL OF ENGINEERING SYSTEMS MODELLING AND SIMULATION, 2025, 16 (02)
  • [48] Modal Analysis of a Multi-cracked FG Shaft Using Finite Element Method
    Gaur, Piyush
    Pamnani, Gulab
    2022 7TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, ICMERR, 2022, : 150 - 156
  • [49] Modal Analysis for Small Satellite System with Finite Element Method
    Bai, Zhengfeng
    Zhao, Yang
    Ma, Wenlai
    Tian, Hao
    2008 2ND INTERNATIONAL SYMPOSIUM ON SYSTEMS AND CONTROL IN AEROSPACE AND ASTRONAUTICS, VOLS 1 AND 2, 2008, : 1263 - 1267
  • [50] MODAL-ANALYSIS OF A SKI BY THE FINITE-ELEMENT METHOD
    DEVAUX, P
    TROMPETTE, P
    JOURNAL OF SOUND AND VIBRATION, 1980, 73 (04) : 597 - 600
12345