Prediction of material discontinuity and modal analysis of aluminium beam using finite element method

被引：3
|
作者：
Kumar, B. Gokul [1 ]
Velmurugan, V. [1 ]
Paramasivam, V. [2 ]
Thanikaikarasan, S. [3 ]
机构：
[1] Saveetha Univ, Saveetha Sch Engn, Dept Mech Engn, Chennai 602105, Tamil Nadu, India
[2] PSNA Coll Engn & Technol, Dept Mech Engn, Dindigul 624622, Tamil Nadu, India
[3] Saveetha Univ, Saveetha Sch Engn, Dept Sci & Humanities, Div Phys, Chennai 602105, Tamil Nadu, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷
关键词：
Cantilever beam; Discontinuity; Dynamics; Modal; Natural frequency; Convergence;
D O I：
10.1016/j.matpr.2019.07.243
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The component failure in the machine parts that affect the function during its operation is due the fatigue failure and stress due to discontinuities. As an initiative of dynamic analysis of the discontinuity in the envelope a metal beam of aluminum of the recommended size is taken and the test of the beam is carried out by fixing as a cantilever and applying the excitation using the hammer excited, and the behaviour of the beam is recorded as the modal analysis to find the natural frequency and the different mode shapes have been observed using the experimental setup, and same have been verified using the ANSYS software in which the theoretical value can be compared to the experimental value and the convergences' of the results are discussed. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：782 / 786
页数：5
相关论文
共 50 条
  • [1] Prediction of material removal rate due to laser beam percussion drilling in aluminium sheet using the finite element method
    Mishra, Sanjay
    Yadava, Vinod
    International Journal of Machining and Machinability of Materials, 2013, 14 (04) : 342 - 362
  • [2] Prediction of material flow pattern in the hot extrusion of aluminium alloys by the finite element method
    Velay, X
    Duan, X
    Sheppard, T
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 3807 - 3812
  • [3] MODAL ANALYSIS OF AUTOMOTIVE CLUTCH USING FINITE ELEMENT METHOD
    Aktir, Yasser
    Brunel, Jean-Francois
    Dufrenoy, Philippe
    Mahe, Herve
    PROCEEDINGS OF THE ASME 12TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS - 2014, VOL 2, 2014,
  • [4] Modal Analysis of Hydropower House by Using Finite Element Method
    Zhang Qiling
    Wu Hegao
    2009 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), VOLS 1-7, 2009, : 132 - 135
  • [5] Modal Analysis of Ultrasonic Horn using Finite Element Method
    Singh, Dhirendra Pratap
    Mishra, Sanjay
    Porwal, Rajesh Kumar
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 3617 - 3623
  • [6] Material softening and strain localization in spatial geometrically exact beam finite element method with embedded discontinuity
    Pirmansek, K.
    Cesarek, P.
    Zupan, D.
    Saje, M.
    COMPUTERS & STRUCTURES, 2017, 182 : 267 - 283
  • [7] Modal analysis and transient response of axially functionally graded (AFG) beam using finite element method
    Aubad, Mohammed Jawad
    Khafaji, Salwan Obaid Waheed
    Hussein, Mustafa Turki
    Al-Shujairi, Mohammed A.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10)
  • [8] Beam finite element for modal analysis of FGM structures
    Murin, Justin
    Aminbaghai, Mehdi
    Hrabovsky, Juraj
    Gogola, Roman
    Kugler, Stephan
    ENGINEERING STRUCTURES, 2016, 121 : 1 - 18
  • [9] Modal Analysis of Practical Quartz Resonators Using Finite Element Method
    Yang, Liu
    Vitchev, Nikolay
    Yu, Zhiping
    IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2010, 57 (02) : 292 - 298
  • [10] Augmented Reality Visualization of Modal Analysis Using the Finite Element Method
    Erkek, Merve Yavuz
    Erkek, Selim
    Jamei, Elmira
    Seyedmahmoudian, Mehdi
    Stojcevski, Alex
    Horan, Ben
    APPLIED SCIENCES-BASEL, 2021, 11 (03): : 1 - 11
12345