Influence of Sr and Mn additions on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys

被引：58
|
作者：
Ashtari, P [1 ]
Tezuka, H
Sato, T
机构：
[1] Tokyo Inst Technol, Dept Met & Ceram Sci, Tokyo 1528552, Japan
[2] Tokyo Inst Technol, Dept Met & Ceram Sci, Tokyo 1528552, Japan
来源：
MATERIALS TRANSACTIONS | 2003年 / 44卷 / 12期
关键词：
aluminum-silicon alloys; strontium addition; intermetallic compounds; modification;
D O I：
10.2320/matertrans.44.2611
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of Sr or Sr and Mn combined additions on the Fe-containing intermetallic compounds in Al-Si-Cu-Fe cast alloys has been investigated using Al-6.5%Si-3.5%Cu-1.0%Fe and Al-6.5%Si-3.5%Cu-1.0%Fe-0.3%Mn alloys (in mass%) with a similar composition to the 319 aluminum alloy. The results show that Sr successfully modifies the large, highly branched beta-needle-like phase (beta: Al5FeSi) into the individual, less-branched and finer one. The combined addition of Mn and Sr results in modification of the needle-like beta-phase as well as promotion of Chinese script and sludge morphology formation. The mechanism of the above morphological changes has been discussed in accordance with the mechanism of nucleation and growth of the beta-needle-like phase during solidification.
引用
收藏
页码：2611 / 2616
页数：6
相关论文
共 50 条
  • [41] Oxidation and abrasive wear of Fe–Si and Fe–Al intermetallic alloys
    A. M. S. Malafaia
    M. T. Milan
    M. Omar
    R. M. Muñoz Riofano
    M. F. de Oliveira
    Journal of Materials Science, 2010, 45 : 5393 - 5397
  • [42] HIGHLIGHTS ON THE ROLE OF Fe, Sr, AND SOLIDIFICATION TIME ON FORMATION IN Al-Si CAST ALLOYS
    Samuel, E.
    Samuel, A. M.
    Doty, H. W.
    Valtierra, S.
    Samuel, F. H.
    INTERNATIONAL JOURNAL OF METALCASTING, 2024,
  • [43] Influence of strontium and lanthanum simultaneous addition on microstructure and mechanical properties of the secondary Al-Si-Cu-Fe alloy
    唐鹏
    李文芳
    赵艳君
    王康
    李伟洲
    詹锋
    JournalofRareEarths, 2017, 35 (05) : 485 - 493
  • [44] Microstructural refinement of Al-Mg-Si cast intermetallic alloys
    Bamberger, M
    SYNTHESIS OF LIGHTWEIGHT METALS III, 1999, : 155 - 162
  • [45] Influence of the combined additions Mn, Cr or Ni on the formation of dispersoids and mechanical properties of Al-Mg-Si-Cu alloys
    Ding, Lipeng
    Zhang, Xuemei
    Lu, Chang
    Wang, Chenglin
    Weng, Yaoyao
    Dong, Qipeng
    Xu, Shaoqiang
    Cao, Lingfei
    Jia, Zhihong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 892
  • [46] Influence of Cu on modifying the beta phase and enhancing the mechanical properties of recycled Al-Si-Fe cast alloys
    C. B. Basak
    N. Hari Babu
    Scientific Reports, 7
  • [47] Influence of Cu on modifying the beta phase and enhancing the mechanical properties of recycled Al-Si-Fe cast alloys
    Basak, C. B.
    Babu, N. Hari
    SCIENTIFIC REPORTS, 2017, 7
  • [48] Kinetic nucleation of primary α(Al) dendrites in Al-7%Si-Mg cast alloys with Ce and Sr additions
    Chen, Zhong-wei
    Hao, Xiao-lei
    Zhao, Jing
    Ma, Cui-ying
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (12) : 3561 - 3567
  • [49] Uncovering the effects of neutralizing elements (Co, Mn and Cr) on the Fe-rich intermetallic formation in Al-Si-Cu alloys
    Wang, Bing
    Wang, Junsheng
    Liu, Xinxiu
    Li, Quan
    Liu, Xiaoguang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 858
  • [50] Morphologies and growth mechanisms of α-Al(FeMn)Si in Al-Si-Fe-Mn alloy
    Gao, Tong
    Wu, Yuying
    Li, Chong
    Liu, Xiangfa
    MATERIALS LETTERS, 2013, 110 : 191 - 194
12345