Effect of Severe Plastic Deformation on the Characteristics of a PM Aluminum Alloy

被引:1
|
作者
Grande, Marco Actis [1 ]
Bidulsky, Robert [1 ]
Bidulska, Jana [2 ]
Kvackaj, Tibor [2 ]
机构
[1] Politecn Torino, Alessandria Campus,Viale T Michel 5, I-15121 Alessandria, Italy
[2] Tech Univ Kosice, Fac Met, Dept Metals Form, Kosice SK-04200, Slovakia
来源
关键词
Powder Metallurgy; Aluminium Alloys; Sintering; ECAP; Porosity; CHANNEL ANGULAR EXTRUSION; BACK-PRESSURE;
D O I
10.4028/www.scientific.net/AMR.189-193.2838
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The paper deals with the influence of severe plastic deformation on the typical powder metallurgy (PM) microstructural characteristics, such as porosity, of a PM aluminum alloy. A commercial ready-to-press aluminum based powder was used as material to be investigated. After applying different compacting pressures (400, 500, 600 and 700 MPa), specimens were debinded in a ventilated furnace at 400 degrees C for 60 min. Sintering was carried out in a vacuum furnace at 610 degrees C for 30 min. The specimens were ECAPed for 1 pass. The dimensional and morphological porosity of investigated materials were measured individually for each pore. Results show that ECAP generates shearing stress breaking down the oxide film; this, coupled to particles deformation under local constraints, enables strong bonding and stability. Therefore, ECAP supports next progressive decreasing of pore size as well as strongly influences both dimensional and morphological porosity characteristics, considering that small pores evolve easily to a circular form. Moreover, ECAP cause strong bonding between adjacent particles, which results in a significant increase of mechanical properties.
引用
收藏
页码:2838 / +
页数:2
相关论文
共 50 条
  • [1] Effect of severe plastic deformation on mechanical properties and microstructure in 7075 aluminum alloy
    Kuramoto, Shigeru
    Horibuchi, Kayo
    Aoi, Ichiro
    Oh-Ishi, Keiichiro
    Keikinzoku/Journal of Japan Institute of Light Metals, 2014, 64 (06): : 241 - 248
  • [2] Deformation behavior of nanostructured aluminum alloy processed by severe plastic deformation
    Islamgaliev, RK
    Yunusova, NF
    Sabirov, IN
    Sergueeva, AV
    Valiev, RZ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 319 : 877 - 881
  • [3] Severe plastic deformation of rheoforged aluminum alloy A356
    Dodangeh, A.
    Kazeminezhad, M.
    Aashuri, H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 371 - 376
  • [4] Effect of plastic deformation on elastic modulus of aluminum alloy
    Li, Xue-Chun
    Yang, Yu-Ying
    Wang, Yong-Zhi
    Bao, Jun
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2002, 12 (04):
  • [5] Effect of the residual stress induced by surface severe plastic deformation on the tensile behavior of an aluminum alloy
    Hong, Jong-Hwa
    Park, Hyeonil
    Kim, Jinsu
    Seok, Moo-Young
    Choi, Hyunsung
    Kwon, Yong Nam
    Lee, Dong Jun
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 7076 - 7090
  • [6] EFFECT OF HEAT TREATMENT ON NANOSTRUCTURING IN HIGH-STRENGTH ALUMINUM ALLOY BY SEVERE PLASTIC DEFORMATION
    Sitdikov, O.
    Krymskiy, S.
    Markushev, M.
    Avtokratova, E.
    Sakai, T.
    REVIEWS ON ADVANCED MATERIALS SCIENCE, 2012, 31 (01) : 62 - 67
  • [7] Effect of Severe Plastic Deformation and Aging States on Microstructure and Mechanical Properties of 2024 Aluminum Alloy
    Demirtas, Muhammet
    Yanar, Harun
    Uzun, Muhammet
    Ustalar, Melih
    Zhang, Zhenjun
    Dai, Renjie
    Jin, Jiewen
    Purcek, Gencaga
    ADVANCED ENGINEERING MATERIALS, 2025,
  • [8] Forging studies with severe plastic deformation processed aluminum alloy 6061
    Srinivasan, R
    Chaudhury, P
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 267 - 272
  • [9] Natural Aging of Aluminum Alloy 2024 After Severe Plastic Deformation
    Irina Volokitina
    Andrey Bychkov
    Andrey Volokitin
    Alexandr Kolesnikov
    Metallography, Microstructure, and Analysis, 2023, 12 : 564 - 566
  • [10] Developing superplastic properties in an aluminum alloy through severe plastic deformation
    Lee, S
    Berbon, PB
    Furukawa, M
    Horita, Z
    Nemoto, M
    Tsenev, NK
    Valiev, RZ
    Langdon, TG
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 272 (01): : 63 - 72