Forming characteristics of cast magnesium alloy sheets manufactured by roll strip casting process

被引：2
|
作者：
Watari, H
Paisarn, R
Koga, N
Haga, T
Davey, K
Rasgado, MTA
机构：
[1] Oyama Natl Coll Technol, Oyama 3230806, Japan
[2] Nippon Inst Technol, Miyashiro, Saitama 345850, Japan
[3] Osaka Inst Technol, Asahi Ku, Osaka 5358585, Japan
[4] Univ Manchester, Manchester M60 1QD, Lancs, England
来源：
ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2 | 2004年 / 274-276卷
关键词：
magnesium alloys; semi-solid strip casting; twin roll caster; warm deep-drawability;
D O I：
10.4028/www.scientific.net/KEM.274-276.379
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Plastic formability of cast magnesium alloy that were hot rolled after roll strip casting was investigated to ascertain the feasibility of semi-solid strip casting process of AD I B magnesium alloy. Hot rolling and heat treatment conditions were changed to examine which conditions were appropriate for producing AD I B wrought magnesium alloys after strip casting process. Microscopic observation of the crystals. of the manufactured wrought magnesium alloys was performed. It has been found that a limiting drawing ratio of 2.7 was possible in a warm deep drawing test of the cast magnesium alloy sheets after being hot rolled.
引用
收藏
页码：379 / 384
页数：6
相关论文
共 50 条
  • [21] Continuous fabrication of bulk amorphous alloy sheets by twin-roll strip casting
    Lee, Jung G.
    Lee, Hakcheol
    Oh, Y. S.
    Lee, S.
    Kim, Nack J.
    INTERMETALLICS, 2006, 14 (8-9) : 987 - 993
  • [22] The twin-roll strip casting of magnesium
    Liang, D
    Cowley, CB
    JOM, 2004, 56 (05) : 26 - 28
  • [23] Strip casting of AZ31 magnesium alloy by the melt drag process equipped with a forming belt
    Nishida, Shinichi
    Motomura, Mitsugu
    Keikinzoku/Journal of Japan Institute of Light Metals, 2006, 56 (10): : 509 - 513
  • [24] The effect of forming passes on the springback and microstructure of magnesium alloy sheets in roll bending
    Wang, Rongjun
    Xue, Sensen
    Zhou, Weiguang
    Wang, Xiaocong
    Zhang, Pengchong
    Wang, Jianhua
    Yan, Yan
    Meng, Zhijuan
    MATERIALS TODAY COMMUNICATIONS, 2025, 42
  • [25] Comparison of superplastic forming abilities of as-cast AZ91 magnesium alloy prepared by twin roll casting and WE43 magnesium alloy
    Taylor, S.
    Janik, V.
    Grimes, R.
    Mogire, E.
    Dashwood, R.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2018, 49 (10) : 1206 - 1212
  • [26] Roll Casting of Aluminum Alloy Clad Strip
    Nakamura, R.
    Haga, T.
    Tsuge, H.
    Watari, H.
    Kumai, S.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 650 - +
  • [27] An experimental study of the strip casting process of aluminum alloy by the twin roll method
    Zhao, HY
    Ju, DY
    Asakami, T
    Hu, L
    MATERIALS AND MANUFACTURING PROCESSES, 2001, 16 (05) : 643 - 654
  • [28] The Effect of the Thermal Deformation of Casting Roll on Strip Thickness in the Strip Casting Process
    Wang, Yuchen
    Zhang, Xiaoming
    Zhang, Yuanxiang
    Li, Zhenlei
    Fang, Feng
    Wang, Yang
    Yuan, Guo
    STEEL RESEARCH INTERNATIONAL, 2022, 93 (11)
  • [29] Thermal analysis of the roll in the strip casting process
    Park, CM
    Kim, WS
    Park, GJ
    MECHANICS RESEARCH COMMUNICATIONS, 2003, 30 (04) : 297 - 310
  • [30] Strip formation and process stability in twin roll strip casting
    Badowski, M
    Hentschel, L
    Kopp, R
    Schmitz, W
    Senk, D
    STEEL RESEARCH, 2001, 72 (11-12): : 484 - 489
12345