Power balance in the ITER plasma and divertor

It is planned to use atomic processes to spread out most of the heating power over the first wall and side walls to reduce the heat loads on the plasma facing components in ITER to similar to 50 MW. Calculations indicate that there will be 100 MW in bremstrahlung radiation from the plasma center, 50 MW of radiation from the plasma edge inside the separatrix and 100 MW of radiation from the scrape-off layer and divertor plasma, leaving 50 MW of power to be deposited on the divertor plates. The radiation losses are enhanced by the injection of impurities such as Neon or Argon at acceptably low levels (similar to 0.1 % Argon, etc.).