Laser photothermal radiometric instrument for industrial steel hardness inspection

被引:0
|
作者
Guo, X. [1 ]
Sivagurunathan, K. [1 ]
Pawlak, M. [1 ]
Garcia, J. [1 ]
Mandelis, A. [1 ]
Giunta, S. [2 ]
Milletari, S. [2 ]
Bawa, S. [3 ]
机构
[1] Univ Toronto, Dept MIE, Ctr Adv Diffus Wave Technol, 5 Kings Coll Rd, Toronto, ON M5S 3G8, Canada
[2] Avio S p A, Ind Technologies Dept, I-10040 Turin, Italy
[3] Metex Heat Treatment Ltd, Brampton, ON L6T 4M2, Canada
来源
15TH INTERNATIONAL CONFERENCE ON PHOTOACOUSTIC AND PHOTOTHERMAL PHENOMENA (ICPPP15) | 2010年 / 214卷
关键词
DEPTH PROFILE RECONSTRUCTION; GENERALIZED METHODOLOGY;
D O I
10.1088/1742-6596/214/1/012080
中图分类号
O59 [应用物理学];
学科分类号
摘要
To meet the industrial demand for on-line steel hardness inspection and quality control, a non-contact, non-destructive laser photothermal radiometric instrument (HD-PTR) was developed. The instrument is equipped with a non-liquid-nitrogen-cooled HgCdZnTe (MCZT) detector, a National Instruments data acquisition card with a Dynamic System Analysis (DSA) module, and control software. A series of industrial steel samples which included automotive screws and aircraft gears (flat or curvilinear) were examined. The effective hardness case depths of these samples ranged from 0.21 mm to 1.78 mm. The results demonstrated that three measurement parameters (metrics) can be extracted when using a fast swept-sine photothermal method. These parameters include the phase minimum (or peak) frequency, f(min), the half width, W, and the area, S. It was found that they are complementary for evaluating widely different ranges of hardness case depths. f(min) is most suitable for large case depths, and Wand S for shallower case depths.
引用
收藏
页数:5
相关论文
共 50 条
  • [41] MAGNETIC INSPECTION OF THE HARDNESS OF FASTENER BLANKS MADE OF STEEL 25Kh1MF.
    Morozova, V.M.
    Nichpuruk, A.P.
    The Soviet journal of nondestructive testing, 1982, 18 (05): : 403 - 405
  • [42] MAGNETIC INSPECTION OF THE HARDNESS OF FASTENER BLANKS MADE OF STEEL 25KH1MF
    MOROZOVA, VM
    NICHIPURUK, AP
    SOVIET JOURNAL OF NONDESTRUCTIVE TESTING-USSR, 1982, 18 (05): : 403 - 405
  • [43] Research on a non-contact steel products dynamic on-line inspection instrument
    Zhang, GY
    An, ZY
    Zhang, CZ
    Song, L
    AUTOMATED OPTICAL INSPECTION FOR INDUSTRY, 1996, 2899 : 354 - 361
  • [44] Study of the Relationship between Entropy and Hardness in Laser Cutting of Hardox Steel
    Girdu, Constantin Cristinel
    Gheorghe, Catalin
    MATERIALS, 2023, 16 (13)
  • [45] Microstructure and properties of selective laser melted high hardness tool steel
    Feuerhahn, F.
    schulz, A.
    Seefeld, T.
    Vollertsen, F.
    LASERS IN MANUFACTURING (LIM 2013), 2013, 41 : 836 - 841
  • [46] Experimental studies on the microstructure and hardness of laser-treated steel specimens
    Rana, J.
    Goswami, G. L.
    Jha, S. K.
    Mishra, P. K.
    Prasad, B. V. S. S. S.
    OPTICS AND LASER TECHNOLOGY, 2007, 39 (02): : 385 - 393
  • [47] The effect of laser shock peening on hardness and microstructure in a welded marine steel
    Ahmad, Bilal
    Fitzpatrick, Michael E.
    JOURNAL OF ENGINEERING-JOE, 2015,
  • [48] Demonstration of a laser-based ultrasonic inspection system for industrial applications
    Hughes Research Lab, Malibu, United States
    Conf Proc Laser Electr Optic Soc Annu Meet, (352):
  • [49] Microscopic laser triangulation in harsh industrial conditions for the inspection of microstructured surfaces
    Mueller, Thomas
    Poesch, Andreas
    Reithmeier, Eduard
    OPTICAL MEASUREMENT TECHNIQUES FOR STRUCTURES & SYSTEMS III, 2016, : 215 - 224
  • [50] EFFECT OF LASER BORONIZING ON MICROSTRUCTURE AND HARDNESS OF MARAGING STEEL PARTS MANUFACTURED BY SELECTIVE LASER MELTING
    Bucelis, Kestutis
    Skamat, Jelena
    Cernasejus, Olegas
    31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022, 2022, : 443 - 448