Effect of inclusions on the formation of acicular ferrite in Ti-bearing non quenched-and-tempered steel

被引:6
|
作者
Yang, Ying
Lai, Chaobin
Wang, Fuming [1 ]
Yang, Zhanbing
Song, Bo
机构
[1] Univ Sci & Technol Beijing, Met & Ecol Engn Sch, Beijing 100083, Peoples R China
[2] Anshan Iron & Steel Grp Corp, Ctr Technol, Anshan 114009, Peoples R China
[3] Xinyu Iron & Steel Grp, Ctr Technol, Xinyu 336501, Peoples R China
关键词
acicular ferrite; titanium; inclusions; non quenched-and-tempered steel;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Nucleation of acicular ferrite and its influence factors in non quenched-and-tempered steel was studied by using TEM and thermodynamic calculation. The results show that the complex particles with a center made of Ti oxide, Al2O3, and silicate and an outside made of a small quantity of mixture of TiN and MnS are able to act as ferrite nucleation nuclei. The acicular ferrite percentage changes little with Ti. When the oxygen content was 80 ppm, the volume percentage of acicular ferrite decreased due to an increase in allotriomorphic ferrite. The larger the cooling rate and the shorter the incubation time, the finer the titanium oxide and the higher the nucleation ratio of acicular ferrite.
引用
收藏
页码:501 / 506
页数:6
相关论文
共 50 条
  • [41] The Relationship Between MnS Precipitation and the Induced Nucleation Effect of Ti-Bearing Inclusions
    Cai Zhengyu
    Lin Hao
    Tian Xiangshen
    Kong Hui
    [J]. PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2017, 54 (02): : 95 - 106
  • [42] Role of inclusions in formation acicular ferrite in HSLA steel weld metals for flux cored wires
    Shengfu, Yu
    Zhiyuan, Li
    Zhongkun, Shi
    Guodong, Zhang
    [J]. Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2001, 37 (07):
  • [43] Effect of ferrite on the hydrogen embrittlement in quenched-partitioned-tempered low carbon steel
    Yang, Jilan
    Song, Yisi
    Lu, Yufei
    Gu, Jianfeng
    Guo, Zhenghong
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 712 : 630 - 636
  • [44] Formation of intragranular acicular ferrite grains in a Ti-containing low carbon steel
    Jin, HH
    Shim, JH
    Cho, YW
    Lee, HC
    [J]. ISIJ INTERNATIONAL, 2003, 43 (07) : 1111 - 1113
  • [45] Evolution of inclusions in Ti-Ce-Mg deoxidized steel and its effect on acicular ferrite transformation in simulated welding HAZ
    Wang, Chao
    Fu, Bo
    Han, Yanfa
    Jia, Chuntang
    [J]. MATERIALS TODAY COMMUNICATIONS, 2024, 40
  • [46] Effect of processing parameters on precipitation reactions occurring in a Ti-bearing IF steel
    Kuziak, R
    Hartman, H
    Budach, M
    Kawalla, R
    [J]. MICROALLOYING FOR NEW STEEL PROCESSES AND APPLICATIONS, 2005, 500-501 : 687 - 694
  • [47] Effect of Al and S on the Evolution of Inclusion and Formation of Acicular Ferrite in the Mg-RE-Ti-Treated Steel
    Xiaokang Cui
    Bo Song
    Jinghong Mao
    [J]. Transactions of the Indian Institute of Metals, 2022, 75 : 2221 - 2230
  • [48] HAZ softening in Nb-, Ti- and Ti + V-bearing quenched and tempered steel welds
    Lei Zhang
    Thomas Kannengiesser
    [J]. Welding in the World, 2016, 60 : 177 - 184
  • [49] Acicular ferrite formation and Mn depletion behavior around the inclusions in Ti-Mg oxide metallurgy steel with different holding times
    Liu, Fangce
    Li, Min
    Bi, Yue
    He, Tong
    Liu, Yandong
    Yuan, Guo
    [J]. MATERIALS TODAY COMMUNICATIONS, 2023, 37
  • [50] Effect of Al and S on the Evolution of Inclusion and Formation of Acicular Ferrite in the Mg-RE-Ti-Treated Steel
    Cui, Xiaokang
    Song, Bo
    Mao, Jinghong
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2022, 75 (09) : 2221 - 2230