Effect of inclusions on the formation of acicular ferrite in Ti-bearing non quenched-and-tempered steel

被引:6
|
作者
Yang, Ying
Lai, Chaobin
Wang, Fuming [1 ]
Yang, Zhanbing
Song, Bo
机构
[1] Univ Sci & Technol Beijing, Met & Ecol Engn Sch, Beijing 100083, Peoples R China
[2] Anshan Iron & Steel Grp Corp, Ctr Technol, Anshan 114009, Peoples R China
[3] Xinyu Iron & Steel Grp, Ctr Technol, Xinyu 336501, Peoples R China
关键词
acicular ferrite; titanium; inclusions; non quenched-and-tempered steel;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Nucleation of acicular ferrite and its influence factors in non quenched-and-tempered steel was studied by using TEM and thermodynamic calculation. The results show that the complex particles with a center made of Ti oxide, Al2O3, and silicate and an outside made of a small quantity of mixture of TiN and MnS are able to act as ferrite nucleation nuclei. The acicular ferrite percentage changes little with Ti. When the oxygen content was 80 ppm, the volume percentage of acicular ferrite decreased due to an increase in allotriomorphic ferrite. The larger the cooling rate and the shorter the incubation time, the finer the titanium oxide and the higher the nucleation ratio of acicular ferrite.
引用
收藏
页码:501 / 506
页数:6
相关论文
共 50 条
  • [2] Effect of inclusion on formation of acicular ferrite in Ti-bearing non-quenched and -tempered steels
    [J]. 2005, Chinese Society for Metals, Qiao Gui-Wen, Beijing, China (40):
  • [3] Formation of Acicular Ferrite in Mg Treated Ti-bearing C-Mn Steel
    Song, Ming-ming
    Song, Bo
    Hu, Chun-lin
    Xin, Wen-bin
    Song, Gao-yang
    [J]. ISIJ INTERNATIONAL, 2015, 55 (07) : 1468 - 1473
  • [4] Nucleation of intragranular acicular ferrite in the heat affected zone of Ti-bearing HSLA steel
    Zhang, Liqing
    Wu, Kaiming
    [J]. ADVANCES IN BUILDING MATERIALS, PTS 1-3, 2011, 168-170 : 837 - 841
  • [5] Effects of Ti-bearing inclusions on intragranular ferrite nucleation
    Qiu, Yue
    Chen, Fuhao
    Huang, Bangfu
    Wu, Zhaoyang
    Kong, Hui
    [J]. MATERIALS TESTING, 2021, 63 (01) : 29 - 33
  • [6] Effect of Ti-Al-O inclusions on the formation of intragranular acicular ferrite
    Cai, Zhengyu
    Zhou, Yahui
    Tong, Lianhai
    Yue, Qiang
    Kong, Hui
    [J]. MATERIALS TESTING, 2015, 57 (7-8) : 649 - 654
  • [7] The Effect of Tellurium on the Formation of MnTe-MnS Composite Inclusions in Non-Quenched and Tempered Steel
    Shen, Ping
    Yang, Qiankun
    Zhang, Dong
    Yang, Shufeng
    Fu, Jianxun
    [J]. METALS, 2018, 8 (08):
  • [8] Effect of MnS Inclusions Distribution on Intragranular Ferrite Formation in Medium Carbon Non-Quenched and Tempered Steel for Large-Sized Crankshaft
    Lu, Jinlong
    Wang, Yunpeng
    Wang, Qiming
    Cheng, Huijing
    Cheng, Guoguang
    [J]. ISIJ INTERNATIONAL, 2019, 59 (03) : 524 - 530
  • [9] Effect of the Ti/N ratio on the hardenability and mechanical properties of a quenched-and-tempered C-Mn-B steel
    Shen, YL
    Hansen, SS
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (10): : 2027 - 2035
  • [10] Effect of the Ti/N ratio on the hardenability and mechanical properties of a quenched-and-tempered C-Mn-B steel
    Yulin Shen
    Steven S. Hansen
    [J]. Metallurgical and Materials Transactions A, 1997, 28 : 2027 - 2035