Vacuum brazing of TiB2 cermet to TiAl-based alloys using Ag-Cu-Zn filler metal

被引：0

作者：

Li, ZR ^{[1
]}

Feng, JC ^{[1
]}

Cao, J ^{[1
]}

机构：

[1] Harbin Inst Technol, State Key Lab Adv Welding Prod Technol, Harbin 150001, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2003年 / 13卷

关键词：

TiB2; cermet; TiAl; vacuum brazing; interface structure; strength;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Vacuum brazing of TiB2 cermet to TiAl-based alloy was carried out at 1 223 K for 5 - 30 min using AgCu-Zn filler metal. The microstructural analyses indicate that three reaction products, Ti(Cu, Al)(2), Ag-Cu eutectic and Ag based solid solution (Ag(s. s)), are present in the brazing seam. The experimental results show that the shear strength of the brazed TiB2/TiAl joints decreases as the brazing time increases at a definite brazing temperature, it is up to 168 MPa when the joint is brazed at 1 223 K for 5 min.

引用

页码：39 / 41

页数：3

共 50 条

[31] Vacuum brazing of Zircaloy-4 and stainless steel using Ag-Cu-Ti brazing filler metal
Qi Kai
Li Ruifeng
PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 2069 - 2073
[32] Vacuum Brazing of C/C Composite and TiAl Intermetallic Alloy Using BNi-2 Brazing Filler Metal
Li, Shengnan
Du, Dong
Zhang, Lei
Hao, Qingle
Long, Weimin
MATERIALS, 2021, 14 (08)
[33] Mechanical property of induction brazing TiAl-based intermetallics to steel 35CrMo using AgCuTi filler metal
He, P
Feng, JC
Xu, W
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 418 (1-2): : 45 - 52
[34] Vacuum brazing of TC4 alloy to AlMgB14–TiB2 ceramic using AgCu filler
Shengpeng Hu
Yu Lei
Xiaoguo Song
Wei Fu
Yun Luo
Yuzhen Lei
Journal of Materials Research, 2019, 34 : 2535 - 2542
[35] Microstructure and kinetics of induction brazing TiAl-based intermetallics to steel 35CrMo using AgCuTi filler metal
He, P
Feng, JC
Xu, W
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 418 (1-2): : 53 - 60
[36] Vacuum brazing of SiBCN ceramic and TC4 alloy using TiB2 reinforced AgTi composite filler
Shi, J. M.
Zhang, L. X.
Liu, H.
Sun, Z.
Feng, J. C.
VACUUM, 2018, 156 : 108 - 114
[37] Grain refinement by trace TiB2 addition in conventional cast TiAl-based alloy
Han, Jianchao
Xiao, Shulong
Tian, Jing
Chen, Yuyong
Xu, Lijuan
Wang, Xiaopeng
Jia, Yi
Du, Zhaoxin
Cao, Shouzhen
MATERIALS CHARACTERIZATION, 2015, 106 : 112 - 122
[38] Adding Cr/Ti metal powder to improve brazing performance of Ag-Cu-Zn alloy to diamond
Zhang, Fenglin
Zhou, Yumei
Fu, Kaixuan
Wang, Chengyong
Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, 2007, (03): : 22 - 25
[39] Vacuum brazing TiAl-based intermetallics using novel Ti-Fe-Mn eutectic brazing alloy
Cai, Y. S.
Liu, R. C.
Ji, H. B.
Cui, Y. Y.
Yang, R.
INTERMETALLICS, 2021, 136 (136)
[40] Diffusion vacuum brazing of TiAl48Cr2Nb2 casting alloys based on TiAl (γ) intermetallic compound using Ag-Cu-Ti braze alloy
Rózan´ski, Maciej
Krasnowski, Krzysztof
Adamiec, Janusz
Solid State Phenomena, 2014, 211 : 141 - 148

← 1 2 3 4 5 →