A Reference Flux Calculation Method with Stator Flux Linkage Synchronous Frame for MTPA Control in Direct Torque Controlled PMSM Drives

被引:0
|
作者
Shinohara, Atsushi [1 ]
Inoue, Yukinori [1 ]
Morimoto, Shigeo [1 ]
Sanada, Masayuki [1 ]
机构
[1] Osaka Prefecture Univ, Dept Elect & Informat Syst, Sakai, Osaka, Japan
关键词
CONTROL STRATEGY; OPERATION; MOTORS; SPEED;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
When direct torque control (DTC) is applied to permanent magnet synchronous motor (PMSM) drives, the relationship between the torque and stator flux linkage is important for high-efficiency drives because DTC requires them as references. In the stator flux linkage synchronous frame (M-T frame), the torque equation is described as a simple equation using the T-axis current. However, the M-axis current is neglected in the equation. This paper derives the relationship between the M-axis current and the stator flux linkage and proposes a maximum torque per ampere control strategy for direct torque controlled PMSM drives using the derived relationship. In addition, the q-axis inductance can be compensated using that relationship because the error in the q-axis inductance causes the estimation error in M-axis current. The simulation results validate the proposed method.
引用
收藏
页码:58 / 63
页数:6
相关论文
共 50 条
  • [31] Formation of a Task of the Stator Flux Linkage of a Synchronous Motor with Permanent Magnets in a Direct Torque-Control System
    Inkov Y.M.
    Kosmodamiansky A.S.
    Pugachev A.A.
    Chuprina N.V.
    Russian Electrical Engineering, 2023, 94 (09) : 645 - 649
  • [32] Novel Deadbeat Direct Torque and Flux Control of Five-phase PMSM Based on Stator Flux Orientation
    Liu G.
    Liu K.
    Zhou H.
    Ye C.
    Zhang D.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2022, 42 (16): : 6073 - 6082
  • [33] Mechanical Sensorless PMSM Drive System Based on Direct Torque Control in M-T Frame Synchronized With Stator Flux-Linkage Vector
    Inoue, Yukinori
    Morimoto, Shigeo
    Sanada, Masayuki
    2015 IEEE SYMPOSIUM ON SENSORLESS CONTROL FOR ELECTRICAL DRIVES (SLED 2015), 2015,
  • [34] Deadbeat Direct Torque and Flux Control for Permanent Magnet Synchronous Motor Based on Stator Flux Oriented
    Lin, Xiaogang
    Huang, Wenxin
    Jiang, Wen
    Zhao, Yong
    Zhu, Shanfeng
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2020, 35 (05) : 5078 - 5092
  • [35] Direct stator flux linkage control technique for a permanent magnet synchronous machine
    Llor, AM
    Rétif, JM
    Lin-Shi, X
    Arnalte, S
    PESC'03: 2003 IEEE 34TH ANNUAL POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-4, CONFERENCE PROCEEDINGS, 2003, : 246 - 250
  • [36] Direct Control of the Stator Flux Linkage Applying in the Permanent Magnet Synchronous Motor
    Pan, Aixian
    Zhao, Hongcai
    2009 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-7, CONFERENCE PROCEEDINGS, 2009, : 3668 - 3673
  • [37] Novel Predictive Stator Flux Control Techniques for PMSM Drives
    Huang, Shoudao
    Wu, Gongping
    Rong, Fei
    Zhang, Changfan
    Huang, Sheng
    Wu, Qiuwei
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2019, 34 (09) : 8916 - 8929
  • [38] The Control of Stator Flux and Torque in the Surface Permanent Magnet Synchronous Motor Direct Torque Control System
    Li, Yaohua
    Liu, Weiguo
    Fu, Zhaoyang
    Gerling, Dieter
    ICIEA: 2009 4TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-6, 2009, : 1995 - +
  • [39] Sensorless Direct Torque Control for PM-Assisted Synchronous Motors With Injection High-Frequency Signal Into Stator Flux Reference Frame
    Guglielmi, Paolo
    Yousefi-Talouki, Arzhang
    Iabichino, Gianluca
    Pellegrino, Gianmario
    2017 IEEE INTERNATIONAL SYMPOSIUM ON SENSORLESS CONTROL FOR ELECTRICAL DRIVES (SLED), 2017, : 139 - 143
  • [40] A New Fixed Switching Frequency Direct Torque Controlled PMSM Drives with Low Ripple in Flux and Torque
    Sutikno, Tole
    Idris, Nik Rumzi Nik
    Jidin, Auzani
    JOURNAL OF ENGINEERING AND TECHNOLOGICAL SCIENCES, 2011, 43 (03): : 173 - 190