Experimental Study on Mechanical Properties of High-Strength Concrete Using Blast Furnace Slag Fine Aggregate

被引：3
|
作者：
Shi, Dongsheng [1 ]
Masuda, Yoshihiro [1 ]
Lee, Youngran [1 ]
机构：
[1] Utsunomiya Univ, Utsunomiya, Tochigi 321, Japan
来源：
HIGH PERFORMANCE STRUCTURES AND MATERIALS ENGINEERING, PTS 1 AND 2 | 2011年 / 217-218卷
关键词：
Blast furnace slag fine aggregate; Crashing value; High-strength concrete; Compressive strength; Tensile strength; Young's modulus;
D O I：
10.4028/www.scientific.net/AMR.217-218.113
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this experiment, blast furnace slag fine aggregate that was produced by 3 different steel factory was been used in high-strength concrete, and mechanical properties of high-strength concrete were studied. The concrete using the blast furnace slag fine aggregate is admitted the increase of compressive strength as well as the case of the river sand when the water cement ratio is reduced, and the compressive strength can attain 100N/mm(2). The strength of concrete using blast furnace slag fine aggregate is lower than the strength of concrete using natural river sand as fine aggregate, and the strength of concrete using mixture fine aggregate is middle of strength used river sand and strength used blast furnace slag fine aggregate. The crushing value of blast furnace slag fine aggregate is bigger than the natural river sand, and it could influence the strength of high-strength concrete using blast furnace slag fine aggregate.
引用
收藏
页码：113 / 118
页数：6
相关论文
共 50 条
  • [21] A study on the alkali-aggregate reaction in high-strength concrete with particular respect to the ground granulated blast-furnace slag effect
    Kwon, Y
    CEMENT AND CONCRETE RESEARCH, 2005, 35 (07) : 1305 - 1313
  • [22] Influence of Blast Furnace slag on the Mechanical Properties of High Performance Concrete
    Park, Wan-Shin
    Cho, Sung-Ho
    Yun, Song-Hui
    Kim, Jeong-Eun
    Kim, Do-Gyeum
    Noh, Jea-Myoung
    ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5, 2013, 634-638 : 2716 - 2719
  • [23] Properties of high fluidity concrete with combination of fine powder of slowly cooled blast furnace slag and granulated blast furnace slag
    Yamamoto, Kenji
    Morioka, Minoru
    Maeda, Yoshitaka
    Chikada, Takao
    Sakai, Etsuo
    Matsushita, Hiromichi
    Zairyo/Journal of the Society of Materials Science, Japan, 2007, 56 (02) : 182 - 189
  • [24] STUDIES ON BLAST-FURNACE-SLAG AGGREGATES FOR CONCRETE - 1. PROPERTIES OF BLAST FURNACE SLAG AGGREGATES AND SLAG AGGREGATE CONCRETE.
    Kasami, Hideo
    Oshida, Fumio
    Ikeda, Tadashi
    Suga, Hiroshi
    1978, (20): : 61 - 71
  • [25] Mechanical Properties and Flowability of High Strength Concrete Incorporating Ground Granulated Blast-furnace Slag
    姚武
    Journal of Wuhan University of Technology(Materials Science), 2001, (03) : 42 - 45
  • [26] Mechanical properties and flowability of high strength concrete incorporating ground granulated blast-furnace slag
    Yao, W
    Wu, KR
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2001, 16 (03): : 42 - 45
  • [27] Study on the Freeze-Thaw Performance of Concrete Using Granulated Blast-Furnace Slag as Fine Aggregate
    Liu Qiang
    Shi Dongsheng
    Ding Xiaoyu
    INTERNATIONAL SYMPOSIUM ON MATERIALS APPLICATION AND ENGINEERING (SMAE 2016), 2016, 67
  • [28] High-strength concrete with different fine aggregate
    Donza, H
    Cabrera, O
    Irassar, EF
    CEMENT AND CONCRETE RESEARCH, 2002, 32 (11) : 1755 - 1761
  • [29] The influence of slag content on the mechanical properties of high-strength concrete
    Zhao, Xiaochun
    Zhao, Meijiu
    Archives of Civil Engineering, 2024, 70 (03) : 419 - 430
  • [30] Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate
    Oren, Osman Hulusi
    Gholampour, Aliakbar
    Gencel, Osman
    Ozbakkaloglu, Togay
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 238 (238)
12345