Resistance Spot Welding between Mild Steel and Stainless Steel

被引：2
|
作者：
Wang, Nannan [1 ]
Qiu, Ranfeng [1 ]
Peng, Weijian [1 ]
Shi, Hongxin [1 ]
机构：
[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang 471003, Peoples R China
来源：
ENVIRONMENTAL TECHNOLOGY AND RESOURCE UTILIZATION II | 2014年 / 675-677卷
关键词：
Resistance spot welding; Mild Steel; Stainless Steel; Property; MECHANICAL-PROPERTIES;
D O I：
10.4028/www.scientific.net/AMM.675-677.23
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Mild steel Q235 and stainless steel SUS304 were welded using resistance spot welding with an interlayer of Ni. The mechanical properties of the joint were examined, the effects of welding parameters on the nugget size and tensile shear strength were investigated. Both the tensile shear strength and nugget diameter increased with the increasing of welding current and welding time, whereas they decreased with the increasing of electrode pressure. The results indicate that the tensile shear strength of joint welded by resistance spot welding with a Ni interplayer is higher in comparison with that obtained by conventional resistance spot weling.
引用
收藏
页码：23 / 26
页数：4
相关论文
共 50 条
  • [21] The Effects of Resistance Spot Welding Parameters on the Mechanical Behavior of Stainless Steel
    Ramdani, Mohammed
    Benachour, Mustapha
    Rahou, Mohammed
    ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2023, 13 (02) : 10501 - 10504
  • [22] Collaborative control strategy for stainless steel resistance spot welding process
    Li, Guizhong
    Wang, Zhaowei
    Li, Mo
    Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (07): : 63 - 66
  • [23] STUDY OF RESISTANCE SPOT WELDING BETWEEN AISI 301 STAINLESS STEEL AND AISI 1020 CARBON STEEL DISSIMILAR ALLOYS
    Ishak, M.
    Shah, L. H.
    Aisha, I. S. R.
    Hafizi, W.
    Islam, M. R.
    JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2014, 6 : 793 - 806
  • [24] RESISTANCE SPOT WELDING OF MILD STEEL SHEETS - A LITERATURE REVIEW.
    Chandel, R.S.
    Indian Welding Journal, 1985, 17 (01): : 1 - 8
  • [25] Interfacial characterization of joint between mild steel and aluminum alloy welded by resistance spot welding
    Qiu, Ranfeng
    Shi, Hongxin
    Zhang, Keke
    Tu, Yimin
    Iwamoto, Chihiro
    Satonaka, Shinobu
    MATERIALS CHARACTERIZATION, 2010, 61 (07) : 684 - 688
  • [26] Expulsion characterization of stainless steel resistance spot welding based on dynamic resistance signal
    Fan, Qiuyue
    Xu, Guocheng
    Gu, Xiaopeng
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 236 : 235 - 240
  • [27] Resistance spot welding of spring steel
    Zhao, Xihua
    Xu, Guocheng
    Xuan, Zhaozhi
    Yu, Haitao
    Hanjie Xuebao/Transactions of the China Welding Institution, 1996, 17 (02): : 128 - 132
  • [28] Microstructure and shearing strength of stainless steel/low carbon steel joints produced by resistance spot welding
    Wang, Bingxu
    Qiu, Feng
    Chen, Lei
    Zhou, Qunchao
    Dong, Baixin
    Yang, Hongyu
    Yang, Jing
    Feng, Zude
    Tyrer, Na
    Barber, Gary C.
    Hu, Ming
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 2668 - 2679
  • [29] Real Time Monitoring Weld Quality of Resistance Spot Welding for Stainless Steel
    Wen, J.
    Wang, C. S.
    Xu, G. C.
    Zhang, X. Q.
    ISIJ INTERNATIONAL, 2009, 49 (04) : 553 - 556
  • [30] Micro-resistance spot welding of nickel free austenitic stainless steel
    Fukumoto, Shinji
    Matsuo, Taiju
    Kuroda, Daisuke
    Tsubakino, Harushige
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 4081 - +
12345