Damage inspection of fiber reinforced polymer-concrete systems using a distant acoustic-laser NDE technique

被引:2
|
作者
Yu, Tzu-Yang [1 ]
Haupt, Robert [2 ]
机构
[1] Univ Massachusetts, Dept Civil & Environm Engn, FA107B,1 Univ Ave, Lowell, MA 01854 USA
[2] MIT, Lincoln Lab, Lexington, MA 02420 USA
关键词
Debonding detection; acoustic-laser NDE; parametric acoustic array (PAA); laser Doppler vibrometry (LDV); dynamic signature;
D O I
10.1117/12.847630
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
In this paper, a distant acoustic-laser NDE technique is proposed, utilizing a high powered standoff parametric acoustic array (PAA) and laser Doppler vibrometry (LDV), for the detection of debonding and delamination in multi-layer composite systems. Fiber-reinforced polymer wrapped concrete cylinder specimens with artificial defect were manufactured and used in the validation of the technique. Low-frequency (50 Hz 2 kHz) and high-frequency (2 kHz 7 kHz) focused sound waves were generated by PAA, and surface dynamic signatures of the specimens were remotely measured by LDV. From the results it is found that the proposed technique successfully captures the presence of near-surface debonding/delamination.
引用
收藏
页数:8
相关论文
共 50 条
  • [21] Damage evaluation of reinforced concrete beams with varying thickness using the acoustic emission technique
    Aldahdooh, M. A. A.
    Bunnori, N. Muhamad
    Johari, M. A. Megat
    CONSTRUCTION AND BUILDING MATERIALS, 2013, 44 : 812 - 821
  • [22] Diagnostic of fatigue damage severity on reinforced concrete beam using acoustic emission technique
    Nor, Noorsuhada Md
    Ibrahim, Azmi
    Bunnori, Norazura Muhamad
    Saman, Hamidah Mohd
    Saliah, Soffian Noor Mat
    Shahidan, Shahiron
    ENGINEERING FAILURE ANALYSIS, 2014, 41 : 1 - 9
  • [23] Fracture studies on synthetic fiber reinforced cellular concrete using acoustic emission technique
    Rasheed, M. Abdur
    Prakash, S. Suriya
    Raju, Gangadharan
    Kawasaki, Yuma
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 169 : 100 - 112
  • [24] Fatigue Damage Evolution and Monitoring of Carbon Fiber Reinforced Polymer Bridge Cable by Acoustic Emission Technique
    Li, Dongsheng
    Hu, Qian
    Ou, Jinping
    INTERNATIONAL JOURNAL OF DISTRIBUTED SENSOR NETWORKS, 2012,
  • [25] Assessment of the Integrity of Reinforced Concrete Beams Strengthened With Carbon Fibre Reinforced Polymer Using the Acoustic Emission Technique
    Mat Saliah, S. N.
    Md Nor, N.
    FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, 2022, 8
  • [26] A novel approach for near-surface defect detection in FRP-bonded concrete systems using laser reflection and acoustic-laser techniques
    Qiu, Qiwen
    Lau, Denvid
    CONSTRUCTION AND BUILDING MATERIALS, 2017, 141 : 553 - 564
  • [27] Fracture behavior and damage evaluation of polyvinyl alcohol fiber concrete using acoustic emission technique
    Li DongSheng
    Hai, Cao
    Ou Jinping
    MATERIALS & DESIGN, 2012, 40 : 205 - 211
  • [28] Concrete roughness characterization using laser profilometry for fiber-reinforced polymer sheet application
    Maerz, NH
    Chepur, P
    Myers, JJ
    Linz, J
    CONCRETE 2001: MATERIALS AND CONSTRUCTION, 2001, (1775): : 132 - 139
  • [29] Control of corrosion-induced damage in reinforced concrete beams using carbon fiber-reinforced polymer laminates
    Badawi, M
    Soudki, K
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2005, 9 (02) : 195 - 201
  • [30] An experimental study of corrosion damage distribution of steel bars in reinforced concrete using acoustic emission technique
    Yu, Ai-Ping
    Naqvi, Mohammad Wasif
    Hu, Liang-Bo
    Zhao, Yan-Lin
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 254