The effect of plastic deformation and residual stress on the permeability and magnetostriction of steels

被引:106
|
作者
Makar, JM [1 ]
Tanner, BK [1 ]
机构
[1] Univ Durham, Dept Phys, Sci Labs, Durham DH1 3LE, England
基金
英国工程与自然科学研究理事会;
关键词
steels; magnetostriction; plastic deformation;
D O I
10.1016/S0304-8853(00)00558-8
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
We report the results of magnetic measurements performed on specially prepared steel samples. These measurements were made after the samples had been uniaxially plastically deformed and the applied stress removed. The observed magnetic behaviour included characteristic changes in the shape of the hysteresis loops and total differential permeability curve, a linear response of the coercive field to the prestress and a lack of continuous changes in the magnetostrictive behaviour with increasing prestress. The results of the experiments indicated that residual stress did not play an important role in the observed variation of these magnetic properties. The changes in the magnetic behaviour were attributed instead to the generation of pinning sites during the plastic deformation process and the different effects of these pinning sites on 180 degrees and 90 degrees domain walls and magnetisation vector rotations. It was also found that the prestress applied to the samples before measurement, rather than the resulting strain, was the factor that directly affected the magnetic parameters. (C) 2000 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:291 / 304
页数:14
相关论文
共 50 条
  • [31] EFFECT OF PLASTIC DEFORMATION AND ANNEALING ON HYDROGEN PERMEABILITY OF FERROMANGANESE AUSTENITE
    KODES, YS
    GELD, PV
    GOLTSOV, VA
    [J]. PHYSICS OF METALS AND METALLOGRAPHY-USSR, 1967, 24 (03): : 144 - &
  • [32] EFFECT OF STRESS RATE ON PLASTIC DEFORMATION.
    Faucher, B.
    Aggarwal, M.L.
    Krausz, A.S.
    [J]. Transactions of the Canadian Society for Mechanical Engineering, 1973, 2 (04) : 235 - 237
  • [33] Analysis of the residual stress in zirconium subjected to surface severe plastic deformation
    Wang, Yaomian
    Yang, Huanping
    Zhang, Conghui
    Yu, Fei
    [J]. METALS AND MATERIALS INTERNATIONAL, 2015, 21 (02) : 260 - 269
  • [34] Plastic Deformation, Microstructure, and Residual Stress in Metal Joining for Light Weighting
    Haque, Rezwanul
    Olofinjana, Ayodele
    Imasogie, Benjamin
    [J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
  • [35] Thermoelastic investigation of residual stress: plastic deformation and the change in thermoelastic constant
    Robinson, A. F.
    Dulieu-Barton, J. M.
    Quinn, S.
    Burguete, R. L.
    [J]. ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6, 2010, 6
  • [36] A Further Study on Knoop Indentation Plastic Deformation for Evaluating Residual Stress
    Kim, Woojoo
    Lee, Kyungyul
    Kim, Jong-hyoung
    Kim, Young-Cheon
    Kwon, Dongil
    [J]. KOREAN JOURNAL OF METALS AND MATERIALS, 2020, 58 (08): : 515 - 521
  • [37] Reduction in residual stress during plastic deformation of the aluminum alloy 7449
    Robinson, Jeremy S.
    Pirling, T.
    Truman, C.E.
    [J]. Materials Performance and Characterization, 2020, 9 (01): : 682 - 691
  • [38] Reduction in Residual Stress during Plastic Deformation of the Aluminum Alloy 7449
    Robinson, J. S.
    Pirling, T.
    Truman, C. E.
    [J]. MATERIALS PERFORMANCE AND CHARACTERIZATION, 2020, 9 (01) : 682 - 691
  • [39] Analysis of the residual stress in zirconium subjected to surface severe plastic deformation
    Yaomian Wang
    Huanping Yang
    Conghui Zhang
    Fei Yu
    [J]. Metals and Materials International, 2015, 21 : 260 - 269
  • [40] DIFFERENCE OF THE PLASTIC STRESS AND RESIDUAL BY HOLLOMAN AND HOOKE EQUATION FOR TWO DIFFERENT STEELS
    Martins, J. A.
    Romao, E. C.
    [J]. HOLOS, 2020, 36 (03)