Kinematics Solution and Workspace Analysis of a Seven (DOF) Redundant Manipulator

被引：0

作者：

Kang, Cunfeng ^{[1
]}

Wu, Juan ^{[1
]}

Zhang, Shizheng ^{[1
]}

Miao, Ting ^{[1
]}

Zong, Guanchen ^{[1
]}

机构：

[1] Beijing Univ Technol, Beijing, Peoples R China

来源：

INTELLIGENT ROBOTICS AND APPLICATIONS, ICIRA 2019, PART VI | 2019年 / 11745卷

关键词：

Tandem manipulator; Seven DOF; Kinematics; Workspace;

D O I：

10.1007/978-3-030-27529-7_11

中图分类号：

TP18 [人工智能理论];

学科分类号：

081104 ; 0812 ; 0835 ; 1405 ;

摘要：

The standard D-H parameter method was used to analyze the kinematic modeling of the redundant manipulator with seven degrees of freedom. By establishing the link coordinate system, the transformation matrix of the end tool coordinate system relative to the fixed coordinate system is obtained, and the positive motion of the manipulator is solved. According to the working condition requirements and the structural constraints of the mechanical arm, the joint angle of the mechanical arm is constrained, and the inverse kinematics solution of the mechanical arm is solved by the matrix inverse multiplication analysis method, and the positive kinematics solution is mutually verified to ensure the correctness of the solution; Matlab Robotics Toolbox 10.3 simulates the working space of the manipulator model, and judges the rationality of the manipulator structure through the simulation space results.

引用

页码：124 / 133

页数：10

共 50 条

[21] Innovative closed-form solution and workspace analysis for a 5-DOF manipulator
State Key Laboratory of Robotics and System, Harbin Institute of Technology, Harbin
150080, China
不详
210094, China
不详
Anhui
241007, China
[J]. Huazhong Ligong Daxue Xuebao, (14-18):
[22] Analysis of workspace and singularity for three DOF parallel manipulator
Han Shukui
Fang Yuefa
[J]. Proceedings of the First International Symposium on Test Automation & Instrumentation, Vols 1 - 3, 2006, : 483 - 486
[23] Analysis on the Workspace of a Tomato Harvesting Manipulator with 7 DOF
Liang, Xifeng
Wang, Yongwei
[J]. ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2, 2011, 37-38 : 155 - +
[24] A Novel Approach for a Inverse Kinematics Solution of a Redundant Manipulator
Kelemen, Michal
Virgala, Ivan
Liptak, Tomas
Mikova, Lubica
Filakovsky, Filip
Bulej, Vladimir
[J]. APPLIED SCIENCES-BASEL, 2018, 8 (11):
[25] Robust Inverse Kinematics by Configuration Control for Redundant Manipulators with Seven DoF
Kuhlemann, I.
Schweikard, A.
Jauer, P.
Ernst, F.
[J]. PROCEEDINGS OF 2016 THE 2ND INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND ROBOTICS, 2016, : 49 - 55
[26] A Kinematics Analysis for a 5-DOF Manipulator
Lu, Jinyan
Xu, De
Wang, Peng
[J]. 26TH CHINESE CONTROL AND DECISION CONFERENCE (2014 CCDC), 2014, : 1495 - 1499
[27] Kinematics and Time Optimal Trajectory Planning of A 10-DOF Redundant Manipulator
Lai, Yinping
Wang, Hesheng
Chen, Weidong
[J]. 2015 IEEE INTERNATIONAL CONFERENCE ON CYBER TECHNOLOGY IN AUTOMATION, CONTROL, AND INTELLIGENT SYSTEMS (CYBER), 2015, : 560 - 565
[28] Kinematics analysis and workspace investigation of a novel 2-DOF parallel manipulator applied in vehicle driving simulator
Zhang, Chen
Zhang, Liyan
[J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2013, 29 (04) : 113 - 120
[29] Kinematics analysis and workspace optimization for a 4-DOF 3T1R parallel manipulator
Zhao, Jie
Wu, Cuncun
Yang, Guilin
Chen, Chin-Yin
Chen, Silu
Xiong, Ciyuan
Zhang, Chi
[J]. MECHANISM AND MACHINE THEORY, 2022, 167
[30] Motion analysis of a kinematically redundant seven-DOF manipulator under the singularity-consistent method
Nenchev, DN
Tsumaki, Y
[J]. 2003 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS, 2003, : 2760 - 2765

← 1 2 3 4 5 →