Heat removal capacity of laminar coolant flow in a micro channel heat sink with different pin fins

被引：45
|
作者：
Yang, Dawei [1 ]
Jin, Zhiyu [1 ]
Wang, Yan [1 ]
Ding, Guifu [1 ]
Wang, Guilian [1 ,2 ]
机构：
[1] Shanghai Jiao Tong Univ, Sch Elect Informat & Elect Engn, Shanghai 200240, Peoples R China
[2] Shanghai Univ Engn Sci, Sch Elect & Elect Engn, 333 Longteng Rd, Shanghai 201620, Peoples R China
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2017年 / 113卷
基金：
中国国家自然科学基金;
关键词：
MICROCHANNEL; OPTIMIZATION; PERFORMANCE; ALGORITHM; DESIGN;
D O I：
10.1016/j.ijheatmasstransfer.2017.05.106
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Micro channel heat sinks with staggered pin fins are designed and studied in this paper. Three typical pin fins (rhombus, hydrofoil and sine) with symmetry geometries and low flow resistance were made a detailed comparison in the study. Simulations indicate that the heat sink with sine pin fins shows the best heat removal capacity and the lowest pressure drop when the coolant flow rate is 100 ml/min and the heating flux is 144 W/cm(2). Chip's hottest points are 357.90 K, 356.81 K and 354.91 K in the three cases and the pressure drops between the inlet and the outlet are 15793.50 Pa, 15242.21 Pa and 15196.04 Pa respectively. The same trend exists among the obtained experimental results and theoretical simulations. The research systematically studied the pin fins' influence to the heat sink by simulation and confirmed the conclusion by experiment. This method can be used in the following research about the heat sink. The study also found the best pin fins configuration of the three typical structures, and the structure will be helpful for the heat sinks design. (C) 2017 Published by Elsevier Ltd.
引用
收藏
页码：366 / 372
页数：7
相关论文
共 50 条
  • [1] The heat transfer characteristics of liquid cooling heat sink with micro pin fins
    Chiu, Han-Chieh
    Hsieh, Ren-Horn
    Wang, Kai
    Jang, Jer-Huan
    Yu, Cheng-Ru
    [J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2017, 86 : 174 - 180
  • [2] Heat Transfer Enhancement in a Microchannel Heat Sink: Nanofluids and/or Micro Pin Fins
    Coskun, Turgay
    Cetkin, Erdal
    [J]. HEAT TRANSFER ENGINEERING, 2020, 41 (21) : 1818 - 1828
  • [3] Effect of circular pin-fins geometry and their arrangement on heat transfer performance for laminar flow in microchannel heat sink
    Vasilev, M. P.
    Abiev, R. Sh
    Kumar, R.
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2021, 170
  • [4] PARAMETER OPTIMIZATION OF A MICRO HEAT SINK WITH CIRCULAR PIN-FINS
    Koz, Mustafa
    Kosar, Ali
    [J]. PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS AND MINICHANNELS, 2010, PTS A AND B, 2011, : 531 - 539
  • [5] FLOW AND HEAT TRANSFER IN HYDROPHOBIC MICRO PIN FINS WITH DIFFERENT CONTACT ANGLES
    Guan, N.
    Jiang, G. L.
    Liu, Z. G.
    Zhang, C. W.
    [J]. HEAT TRANSFER RESEARCH, 2019, 50 (08) : 799 - 820
  • [6] Numerical investigation of pressure drop and heat transfer in pin fin heat sink and micro channel pin fin heat sink
    Saravanan, Venkatesh
    Umesh, Chitradurga K.
    Hithaish, Doddamani
    Seetharamu, Kanakanahalli
    [J]. INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 2018, 36 (01) : 267 - 276
  • [7] Systematic micro heat sink optimization based on hydrofoil shape pin fins
    Ismayilov, Fuad
    Akturk, Ali
    Peles, Yoav
    [J]. CASE STUDIES IN THERMAL ENGINEERING, 2021, 26
  • [8] Uniform design for the parameters optimization of pin-fins channel heat sink
    Yang, Jun
    Li, Lei
    Yang, Liying
    Li, Jiaqiang
    [J]. APPLIED THERMAL ENGINEERING, 2017, 120 : 289 - 297
  • [9] OPTIMIZATION OF OPEN MICRO-CHANNEL HEAT SINK WITH PIN FINS BY MULTI-OBJECTIVE GENETIC ALGORITHM
    Jiang, Meixia
    Pan, Zhongliang
    [J]. THERMAL SCIENCE, 2022, 26 (4B): : 3653 - 3665
  • [10] Numerical comparison for thermo-hydraulic performance of pin fin heat sink with micro channel pin fin heat sink
    V SARAVANAN
    C K UMESH
    [J]. Sādhanā, 2018, 43
12345