Carbon and Silane-based Coatings for Improved Bonding in Hybrid Metal-Composite Applications

被引：0
|
作者：
Zoesmar, Nira [1 ]
Birkle, Lena [1 ]
Fuchs, Daryl [1 ]
Warnck, Moritz [1 ]
Wendel, Michael [2 ]
Kuhn, Marcus [2 ]
Taha, Iman [1 ,3 ]
机构：
[1] Fraunhofer Inst Casting Composite & Proc Technol, Technol Zentrum 2, D-86159 Augsburg, Germany
[2] KUHN Beschichtungen GmbH, Technol Zentrum 5, D-86159 Augsburg, Germany
[3] Aalen Univ Appl Sci Technol & Econ, Polymer Technol, Beethovenstr 1, D-73430 Aalen, Germany
来源：
CHEMIE INGENIEUR TECHNIK | 2022年 / 94卷 / 07期
关键词：
Carbon fiber reinforced composite; Diamond-like carbon; Multi-material combinations; Organosilanes; Powder bed fusion of metals; SURFACE; POLAR; PEEL;
D O I：
10.1002/cite.202200057
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Interfacial bonding in multi-material structures is crucial for component performance. The influence of organosilane and Diamond-Like Carbon coatings were investigated for improved bond strength of additively manufactured AlSi10Mg, CuCr1Zr and Ti6Al4V with carbon fiber reinforced polymer composite. Treated surfaces were evaluated by surface energy, contact angle, film adhesion and thickness measurements, SEM-EDX analysis and double-lap-shear tests. Coating improved the bond strength by around 20 % in case of AlSi10Mg and CuCr1Zr, whereas treatment did not show any significant effect for Ti6Al4V.
引用
收藏
页码：1030 / 1039
页数：10
相关论文
共 50 条
  • [31] Progressive failure of metal-composite hybrid wheels under impact
    Hwang, Shun-Fa
    Yu, Hui-Lun
    Liu, Yu-Jen
    Chen, Yuder
    Chen, Shih-Chieh
    Hsieh, Yueh-Chih
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2018, 32 (01) : 223 - 229
  • [32] Axial crushing of metal-composite hybrid tubes: experimental analysis
    Boria, Simonetta
    Scattina, Alessandro
    Belingardi, Giovanni
    AIAS2017 - 46TH CONFERENCE ON STRESS ANALYSIS AND MECHANICAL ENGINEERING DESIGN, 2018, 8 : 102 - 117
  • [33] Experimental investigation of a novel hybrid metal-composite joining technology
    Ucsnik, S.
    Scheerer, M.
    Zaremba, S.
    Pahr, D. H.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (03) : 369 - 374
  • [34] Structural transformation of silane-based zirconium-modified sol-gel coatings
    Collazo, A.
    Covelo, A.
    Perez, C.
    SURFACE AND INTERFACE ANALYSIS, 2010, 42 (6-7) : 1201 - 1204
  • [35] Development of Silane-Based Coatings with Zirconia Nanoparticles Combining Wetting, Tribological, and Aesthetical Properties
    Lopez de Armentia, Sara
    Pantoja, Mariola
    Abenojar, Juana
    Angel Martinez, Miguel
    COATINGS, 2018, 8 (10):
  • [36] A closer look at silane-based anti-bacterial coatings on polycarbonate: synthesis and characterizations
    Evcin, A.
    Coskun, B.
    Akarca, G.
    INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, 2022, 19 (12) : 11741 - 11748
  • [37] A closer look at silane-based anti-bacterial coatings on polycarbonate: synthesis and characterizations
    A. Evcin
    B. Çoşkun
    G. Akarca
    International Journal of Environmental Science and Technology, 2022, 19 : 11741 - 11748
  • [38] Superhydrophobic silane-based surface coatings on metal surface with nanoparticles hybridization to enhance anticorrosion efficiency, wearing resistance and antimicrobial ability
    Nie, Yan
    Ma, Shengyan
    Tian, Maozhang
    Zhang, Qun
    Huang, Jiankun
    Cao, Meiwen
    Li, Yuqi
    Sun, Lu
    Pan, Jie
    Wang, Yuming
    Bi, Pengyu
    Xu, Hualong
    Zeng, Jingbin
    Wang, Shengjie
    Xia, Yongqing
    SURFACE & COATINGS TECHNOLOGY, 2021, 410
  • [39] Impact resistance of metal-composite hybrid joints produced by frictional heat
    Andre, Natalia M.
    dos Santos, Jorge F.
    Amancio-Filho, Sergio T.
    COMPOSITE STRUCTURES, 2020, 233
  • [40] Energy absorption of metal-composite hybrid tubes with a diamond origami pattern
    Song, Zhibo
    Ming, Shizhao
    Du, Kaifan
    Zhou, Caihua
    Wang, Yan
    Xu, Shengli
    Wang, Bo
    THIN-WALLED STRUCTURES, 2022, 180
12345