ANALYSIS OF THE DUAL PHASE LAG BIO-HEAT TRANSFER EQUATION WITH CONSTANT AND TIME-DEPENDENT HEAT FLUX CONDITIONS ON SKIN SURFACE

被引:16
|
作者
Ziaei Poor, Hamed [1 ]
Moosavi, Hassan [1 ]
Moradi, Amir [2 ]
机构
[1] Isfahan Univ Technol, Dept Mech Engn, Esfahan, Iran
[2] Bu Ali Sina Univ, Dept Mech Engn, Hamadan, Iran
来源
THERMAL SCIENCE | 2016年 / 20卷 / 05期
关键词
dual phase lag model; Laplace transform; skin tissue; thermal wave model; Fourier model; PULSATILE BLOOD-FLOW; BIOHEAT TRANSFER; SIMULATION; TISSUES; MODEL;
D O I
10.2298/TSCI140128057Z
中图分类号
O414.1 [热力学];
学科分类号
摘要
This article focuses on temperature response of skin tissue due to time-dependent surface heat fluxes. Analytical solution is constructed for dual phase lag bio-heat transfer equation with constant, periodic, and pulse train heat flux conditions on skin surface. Separation of variables and Duhamel's theorem for a skin tissue as a finite domain are employed. The transient temperature responses for constant and time-dependent boundary conditions are obtained and discussed. The results show that there is major discrepancy between the predicted temperature of parabolic (Pennes bio-heat transfer), hyperbolic (thermal wave), and dual phase lag bio-heat transfer models when high heat flux accidents on the skin surface with a short duration or propagation speed of thermal wave is finite. The results illustrate that the dual phase lag model reduces to the hyperbolic model when TT approaches zero and the classic Fourier model when both thermal relaxations approach zero. However for tau(q) = tau(T), the dual phase lag model anticipates different temperature distribution with that predicted by the Pennes model. Such discrepancy is due to the blood perfusion term in energy equation. It is in contrast to results from the literature for pure conduction material, where the dual phase lag model approaches the Fourier heat conduction model when tau(q) = tau(T). The burn injury is also investigated.
引用
收藏
页码:1457 / 1472
页数:16
相关论文
共 50 条
  • [21] Transient Heat Transfer Analysis in Insulated Pipe with Constant and Time-Dependent Heat Flux for Solar Convective Furnace
    Sachdeva, Manish
    Chandra, Laltu
    CONCENTRATED SOLAR THERMAL ENERGY TECHNOLOGIES: RECENT TRENDS AND APPLICATIONS, 2018, : 235 - 249
  • [22] Numerical study on triple layer skin tissue freezing using dual phase lag bio-heat model
    Singh, Sonalika
    Kumar, Sushil
    International Journal of Thermal Sciences, 2014, 86 : 12 - 20
  • [23] Bio-heat response of skin tissue based on three-phase-lag model
    Qiao Zhang
    Yuxin Sun
    Jialing Yang
    Scientific Reports, 10
  • [24] Bio-heat response of skin tissue based on three-phase-lag model
    Zhang, Qiao
    Sun, Yuxin
    Yang, Jialing
    SCIENTIFIC REPORTS, 2020, 10 (01)
  • [25] Analysis of Bio-Heat Transfer Using the Equation From the DPL Model
    Chen, Yuen-Shin
    Liu, Kuo-Chi
    JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2012, 33 (02): : 133 - 140
  • [26] Analysis of bio-heat transfer using the equation from the DPL model
    Chen, Yuen-Shin
    Liu, Kuo-Chi
    Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 2012, 33 (02): : 133 - 140
  • [27] Evaluation of heat conduction in a laser irradiated tooth with the three-phase-lag bio-heat transfer model
    Falahatkar, S.
    Nouri-Borujerdi, A.
    Mohammadzadeh, A.
    Najafi, M.
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2018, 7 : 203 - 212
  • [28] Retrieving the time-dependent blood perfusion coefficient in the thermal-wave model of bio-heat transfer
    Alosaimi, M.
    Lesnic, D.
    ENGINEERING COMPUTATIONS, 2024, 41 (07) : 1824 - 1838
  • [29] Nonlinear analysis of dual-phase lag bio-heat model in living tissues induced by laser irradiation
    Hobiny, Aatef D.
    Abbas, Ibrahim A.
    JOURNAL OF THERMAL STRESSES, 2020, 43 (04) : 503 - 511
  • [30] A Simulation Study of Bio-heat Transfer in Human Skin under Different Burning Conditions
    Mukaddes, Abul Mukid Mohammad
    Jaher, Md. Rezwan
    Roy, Dipon
    Shioya, Ryuji
    PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (ICME 2017), 2018, 1980