Influence of amount of oxidizing slag discharged from stainless steelmaking process of electric arc furnace on elution behavior into fresh water

被引:5
|
作者
Yokoyama, S. [1 ]
Shimomura, T. [2 ]
Hisyamudin, M. N. N. [3 ]
Takahashi, T. [4 ]
Izaki, M. [1 ]
机构
[1] Toyohashi Univ Technol, Dept Mech Engn, Tempaku Cho, Toyohashi, Aichi 4418105, Japan
[2] Toyohashi Univ Technol, Grad Program Mech Engn, Toyohashi, Aichi 4418105, Japan
[3] Univ Tun Hussein Onn Malaysia, Fac Mech & Mfg Engn, Johor Baharu 86400, Malaysia
[4] Miyakonojo Natl Coll Technol, Dept Chem Sci & Technol, Miyakonojo, Miyazaki 8858567, Japan
关键词
FLUORINE;
D O I
10.1088/1742-6596/352/1/012051
中图分类号
O59 [应用物理学];
学科分类号
摘要
Fundamental study was carried out for provision for acidification of soil due to acid rain. The influence of weight of the additive slag on elution behavior of the slag into water was studied in this study. Elution experiment was carried out on a basis of JIS K 0058-1. Generally, the pH in the aqueous solution increased with an increase in weight of the additive slag. The pH converged to approximately eight. Calcium, magnesium and manganese, which were essential elements for plants, were eluted from the slag irrespective to elution condition. The eluted concentrations of Ca and Mg increased with an increase in weight of the additive slag. Silicon and zinc were also eluted depending on the conditions. Aluminum that was harmful for plants was not eluted from the used slag.
引用
收藏
页数:8
相关论文
共 40 条
  • [31] Influence of Aluminum-Carbon Composite Pellets on FeO Reduction and Iron Recovery from Electric Arc Furnace Slag
    Jung Ho Heo
    Jun Soo Yoo
    Yongsug Chung
    Joo Hyun Park
    Metallurgical and Materials Transactions B, 2019, 50 : 903 - 913
  • [32] Influence Factor Analysis and Prediction Model of End-Point Carbon Content Based on Artificial Neural Network in Electric Arc Furnace Steelmaking Process
    Yang, Lingzhi
    Li, Bo
    Guo, Yufeng
    Wang, Shuai
    Xue, Botao
    Hu, Shaoyan
    COATINGS, 2022, 12 (10)
  • [33] Neutralisation of acid effluent from steel manufacturing industry and removal of metals using an integrated electric arc furnace dust slag/lime process
    Forsido, Tedlaye
    McCrindle, Rob
    Maree, Jannie
    Mpenyana-Monyatsi, Lizzy
    SN APPLIED SCIENCES, 2019, 1 (12):
  • [34] Neutralisation of acid effluent from steel manufacturing industry and removal of metals using an integrated electric arc furnace dust slag/lime process
    Tedlaye Forsido
    Rob McCrindle
    Jannie Maree
    Lizzy Mpenyana-Monyatsi
    SN Applied Sciences, 2019, 1
  • [35] Influence of acid type and concentration on the synthesis of nanostructured titanium dioxide photocatalysts from titanium-bearing electric arc furnace molten slag
    Li, Yang
    Yang, Yang
    Guo, Min
    Zhang, Mei
    RSC ADVANCES, 2015, 5 (18): : 13478 - 13487
  • [36] Applicability of water-spray electric arc furnace steel slag for removal of Cd and Mn ions from aqueous solutions and industrial wastewaters
    Abd El-Azim, Hoda
    Seleman, Mohamed M. El-Sayed
    Saad, Eman M.
    JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 2019, 7 (02):
  • [37] Influence of residuals resulting from scrap use in the electric arc furnace process on the properties of hot-work tool steels
    Ernst, C
    Wewers, B
    JOURNAL OF MATERIALS SCIENCE, 2004, 39 (02) : 637 - 640
  • [38] Influence of residuals resulting from scrap use in the electric arc furnace process on the properties of hot-work tool steels
    C. Ernst
    B. Wewers
    Journal of Materials Science, 2004, 39 : 637 - 640
  • [39] Selective dissolution of zinc and lead from electric arc furnace dust via oxidative thermolysis with polyvinyl chloride and water-leaching process
    Al-Harahsheh, Mohammad
    Altarawneh, Sanad
    Al-Omari, Mohammad
    HYDROMETALLURGY, 2022, 212
  • [40] Effect of SiO2 Addition on Lead Volatilization Behavior from Electric Arc Furnace Dust by Smelting Reduction: Reaction Kinetics, Phase Transformation and Industrial Process
    Li, Chen
    Liu, Wei
    Jiao, Fen
    Ling, Hongbin
    Liu, Shiyang
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2025,