Flow Ability Enhancement of Waxy Crude Oil Using New Spirocompound Based on Aromatic Amine System

被引:4
|
作者
Al-Sabagh, A. M. [1 ]
Mahmoud, Tahany [1 ]
Helal, Maher Helmy [2 ]
Abdelrahman, A. M. [1 ]
Abdallah, Amira E. M. [2 ]
El-Rayes, Mona [1 ]
机构
[1] Egyptian Petr Res Inst, Chem Serv & Dev Ctr, Cairo 11727, Egypt
[2] Helwan Univ, Fac Sci, Helwan, Egypt
来源
EGYPTIAN JOURNAL OF CHEMISTRY | 2019年 / 62卷 / 12期
关键词
Spiro compound; Wax Crude Oil; Pour Point; Rheology; Physical Blends; PIPELINE; IMPROVERS;
D O I
10.21608/ejchem.2019.11135.1714
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
THIS work was focused on an investigating of flow ability of waxy crude oil by nontraditional polymer compound. For this propose, a spirocompound consisted of benzaldehyede and triethanolamine 6,6'-(((phenylmethylene) bis (oxy)) bis (ethane-2,1-diyl)) bis (2-phenyl-1,3,6-dioxazocane) [SB1] was synthesized using zeolite as a catalyst. The chemical structure of the [SB1] was investigated by FT-IR, TGA,GPC, H1NMR and Mass spectroscopy. The rheological behavior and pour point depression of waxy crude oil were also studied different dosages and temperatures. The results showed a significant reduction in the viscosity at different temperatures and dosages. Moreover, it was noticed a decrease in the apparent viscosity and the Bingham yield value for [SB1] 437.7, 367.1, and 307.1 cp and 0.48, 0.39 and 0.31 Pa at 15 degrees C, 20 degrees C and 30 degrees C and concentration 1000 ppm respectively. While the blank experiment displayed 743.1, 694.2 and 607.2 cp and 0.74, 0.69 and 0.60 Pa at the same temperatures. This study included blends between [SB1] and the acrylate based polymers abbreviated as (B1, B2, B3 and B4). Furthermore, the rheological behavior and the pour point for these blends exhibited that the blend [B4] shew more reduction in the apparent viscosity than [SB1] being alone. The apparent viscosity and yield value for [B4] were; 267.8, 249.2 and 212.7 cp and 0.22, 0.11 and 0.09 Pa at 15 degrees C, 20 degrees C and 30 degrees C and concentration 1000 ppm respectively. The pour point depression (Delta pp) of [SB1] was 9 degrees C while the blank pour point was 27 degrees C and the B4 was achieved the maximum depression in the pour point (Delta pp= 18 degrees C) at a concentration of 1000 ppm. This result means that the addition of [SB1] to [B4] showed the most positive synergistic effect.
引用
收藏
页码:2289 / 2301
页数:13
相关论文
共 50 条