Wear of PVD Ti/TiN multilayer coatings

被引：86
|
作者：
Bromark, M
Larsson, M
Hedenqvist, P
Hogmark, S
机构：
[1] Division of Materials Science, Department of Technology, Uppsala University
来源：
SURFACE & COATINGS TECHNOLOGY | 1997年 / 90卷 / 03期
关键词：
wear; PVD; multilayer; coatings;
D O I：
10.1016/S0257-8972(96)03141-6
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The wear characteristics of PVD Ti/TiN multilayer coatings subjected to two-body abrasion and particle erosion have been studied using diamond slurry and silicon carbide particles as abrasive medium and erodant, respectively. The abrasive wear rate of the Ti/TiN multilayer coatings was found to increase with the relative amount of metallic Ti in the coatings. In erosion, the lowest wear rate was recorded for the homogeneous TiN coating. For the Ti/TiN multilayer coatings the erosion rate was found to decrease with an increasing relative amount of metallic Ti in the coatings. It is concluded that the concept of multilayered coatings offers a potent means to tailor the properties of tribological coatings. In particular, demands of different applications can be met by adjusting the relative thickness of metallic Ti in Ti/TiN coatings. The amount of metallic Ti can, for example, be used to control the coating residual stress state. Multilayered Ti/TiN coatings seem promising for combined wear and corrosion protection. (C) 1997 Elsevier Science S.A.
引用
收藏
页码：217 / 223
页数：7
相关论文
共 50 条
  • [21] Microstructure, hardness and corrosion behaviour of Ti/TiN multilayer coatings produced by plasma activated EB-PVD
    Zhou, Dapeng
    Peng, Hui
    Zhu, Liu
    Guo, Hongbo
    Gong, Shengkai
    SURFACE & COATINGS TECHNOLOGY, 2014, 258 : 102 - 107
  • [22] Tribological behavior and wear mechanisms of TiN/TiCN/TiN multilayer coatings
    Y. L. Su
    W. H. Kao
    Journal of Materials Engineering and Performance, 1998, 7 : 601 - 612
  • [23] Comparative analysis of wear on PVD TiN and (Ti1-x Alx)N coatings in machining process
    Avila, R. F.
    Mancosu, R. D.
    Machado, A. R.
    Vecchio, S. D.
    da Silva, R. B.
    Vieira, J. M.
    WEAR, 2013, 302 (1-2) : 1192 - 1200
  • [24] Erosion wear of CrN, TiN, CrAlN, and TiAlN PVD nitride coatings
    Deng Jianxin
    Wu Fengfang
    Lian Yunsong
    Xing Youqiang
    Li Shipeng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 35 : 10 - 16
  • [25] Multilayered PVD Ti/TiN, TiN/NbN and TiN/TaN coatings - a tribological and mechanical comparison
    Nordin, M
    Larsson, M
    Hedenqvist, P
    Hogmark, S
    ADVANCES IN HARD MATERIALS PRODUCTION, 1996, : 407 - 414
  • [26] Fracture behaviours of TiN and TiN/Ti multilayer coatings on Ti substrate during nanoindentation
    Sun, Yong
    Lu, Cheng
    Tieu, A. Kiet
    Zhao, Yue
    Zhu, Hongtao
    Cheng, Kuiyu
    Kong, Charlie
    TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES, 2012, : 963 - 970
  • [27] Cavitation erosion resistance of Ti/TiN multilayer coatings
    Krella, Alicja K.
    SURFACE & COATINGS TECHNOLOGY, 2013, 228 : 115 - 123
  • [28] Particle and rain erosion mechanisms on Ti/TiN multilayer PVD coatings for carbon fibre reinforced polymer substrates protection
    Coto, Borja
    Hallander, Per
    Mendizabal, Lucia
    Pagano, Francesco
    Kling, Hans
    Ortiz, Rocio
    Barriga, Javier
    Selegard, Linnea
    WEAR, 2021, 466
  • [29] Aluminium and Ti/Al multilayer PVD coatings for enhanced corrosion resistance
    Charrier, C
    Jacquot, P
    Denisse, E
    Millet, JP
    Mazille, H
    SURFACE & COATINGS TECHNOLOGY, 1997, 90 (1-2): : 29 - 34
  • [30] Aluminum and Ti/Al multilayer PVD coatings for enhanced corrosion resistance
    Charrier, C.
    Jacquot, P.
    Denisse, E.
    Millet, J.P.
    Mazille, H.
    Surface and Coatings Technology, 1997, 90 (1-2): : 29 - 34
12345