In situ synthesis of ultrafine ZrB2-SiC composite powders and the pressureless sintering behaviors

被引:37
|
作者
Yan, Yongjie [1 ,2 ]
Zhang, Hui [1 ,2 ]
Huang, Zhengren [1 ]
Liu, Jianxue [1 ]
Jiang, Dongliang [1 ]
机构
[1] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
[2] Chinese Acad Sci, Grad Sch, Beijing 100039, Peoples R China
关键词
D O I
10.1111/j.1551-2916.2008.02296.x
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Ultrafine ZrB2-SiC composite powders have been synthesized in situ using carbothermal reduction reactions via the sol-gel method at 1500 degrees C for 1 h. The powders synthesized had a relatively smaller average crystallite size (< 200 nm), a larger specific surface area (similar to 20 m(2)/g), and a lower oxygen content (similar to 1.0 wt %). Composites of ZrB2+20 wt% SiC were pressureless sintered to similar to 96.6% theoretical density at 2250 degrees C for 2 h under an argon atmosphere using B4C and Mo as sintering aids. Vickers hardness and flexural strength of the sintered ceramic composites were 13.9 +/- 0.3 GPa and 294 +/- 14 MPa, respectively. The microstructure of the composites revealed that elongated SiC grain dispersed uniformly in the ZrB2 matrix. Oxidation from 1100 degrees to 1600 degrees C for 30 min showed no decrease in strength below 1400 degrees C but considerable decrease in strength with a rapid weight increment was observed above 1500 degrees C. The formation of a protective borosilicate glassy coating appeared at 1400 degrees C and was gradually destroyed in the form of bubble at higher temperatures.
引用
收藏
页码:1372 / 1376
页数:5
相关论文
共 50 条
  • [41] Study on ZrB2-SiC Prepared by Field Assisted Sintering
    Wang, Weijun
    Zhu, Shizhen
    Yan, Zhenyu
    Xu, Qiang
    HIGH-PERFORMANCE CERAMICS VII, PTS 1 AND 2, 2012, 512-515 : 729 - +
  • [42] Effect of AlN as sintering aid on hot-pressed ZrB2-SiC ceramic composite
    Han, Wenbo
    Li, Gang
    Zhang, Xinghong
    Han, Jiecai
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 471 (1-2) : 488 - 491
  • [43] Synthesis of ZrB2-SiC composite powders by sol-gel method using acetic acid as chemical modifier
    Zhang, Yun
    Zhang, Yue
    Li, Rui-Xing
    Yin, Shu
    Sato, Tsugio
    Li, Jun-Ping
    JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2015, 46 : 200 - 204
  • [44] Oxidation Behaviors of ZrB2-SiC Ceramics with Different Porosity
    Zhao, Litao
    Hou, Cheng
    Jin, Xiaochao
    Li, Pan
    Wang, Zhiyong
    Fan, Xueling
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (08)
  • [45] Pressureless sintering and properties of additively manufactured ZrB2–SiC
    Lakusta, Marharyta
    Timme, Nicholas M.
    Watts, Jeremy L.
    Fahrenholtz, William G.
    Hilmas, Gregory E.
    Lipke, David W.
    Journal of the American Ceramic Society, 2025, 108 (03)
  • [46] Properties of Slip-Cast and Pressureless-Sintered ZrB2-SiC Composites
    Medri, Valentina
    Capiani, Claudio
    Bellosi, Alida
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2011, 8 (02) : 351 - 359
  • [47] Oxidation resistance of ZrB2 and ZrB2-SiC ultrafine powders synthesized by a combined sol-gel and boro/carbothermal reduction method
    Li, Faliang
    Cao, Yingnan
    Liu, Jianghao
    Zhang, Haijun
    Zhang, Shaowei
    CERAMICS INTERNATIONAL, 2017, 43 (10) : 7743 - 7750
  • [48] The repeated thermal shock behaviors of a ZrB2-SiC composite heated by electric resistance method
    Meng, Songhe
    Qi, Fei
    Chen, Hongbo
    Wang, Zhi
    Bai, Guanghui
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2011, 29 (01): : 44 - 48
  • [49] Spark plasma sintering of ZrB2-SiC composites with in-situ reaction bonded silicon carbide
    Ortona, Alberto
    Lagos, Miguel A.
    Scocchi, Giulio
    Barcena, Jorge
    CERAMICS INTERNATIONAL, 2014, 40 (01) : 821 - 826
  • [50] Oxidation of ZrB2-SiC
    Opila, EJ
    Halbig, MC
    25TH ANNUAL CONFERENCE ON COMPOSITES, ADVANCED CERAMICS, MATERIALS, AND STRUCTURES: A, 2001, 22 (03): : 221 - 228