Preparation and elastic-plastic indentation response of MgAlON transparent ceramics

被引：8

作者：

Zhang, Wei ^{[1
]}

Wang, Yuezhong ^{[2
]}

Chen, Jian ^{[1
]}

Jiang, Ruomei ^{[1
]}

Shi, Zitao ^{[1
,2
]}

Yang, Guojian ^{[2
]}

Hu, Weiyin

Xu, Qiang ^{[1
]}

Xie, Xiumin ^{[1
]}

Tan, Yang ^{[1
]}

Huang, Shuai ^{[1
]}

Zhang, Zhibin ^{[1
]}

Song, Hai-Zhi ^{[1
,3
]}

机构：

[1] Southwest Inst Tech Phys, Chengdu 610041, Peoples R China

[2] Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Ningbo 315201, Peoples R China

[3] Univ Elect Sci & Technol China, Inst Fundamental & Frontier Sci, Sect 2-4,Jianshebei Rd, Chengdu 610054, Sichuan, Peoples R China

来源：

CERAMICS INTERNATIONAL | 2022年 / 48卷 / 01期

基金：

中国国家自然科学基金;

关键词：

MgAlON; Nanoindentation; Deformation; Grain boundaries; Hardness; MECHANICAL-PROPERTIES; SIZE; FABRICATION; HARDNESS; LOAD;

D O I：

10.1016/j.ceramint.2021.09.167

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

MgAlON transparent ceramic was prepared via pressureless sintering and post hot isostatic pressing. The in-line transmittance of MgAlON ceramic exceeds 80% in the range 0.39-4.67 mu m, and the ceramic was fully dense with average grain sizes -55 mu m. The mechanical properties at the grain boundary (GB) and the center of the grain (CG) of MgAlON ceramic was investigated by nanoindentation at forces of 1 x 102-3 x 105 mu N. The results indicated that the hardness values of MgAlON ceramic were sensitive to the testing forces and measurements position. The hardness at GB zone was lower than that at CG zone, which was probably ascribed to weaker interatomic bonding force in GB area. The Meyer's index of the hardness in GB and CG regions is 1.87 and 1.82, respectively. There is a weaker ISE in GB area of MgAlON as a result of larger plasticity and smaller elasticity. The hardness values of GB and CG regions are -13.36 GPa and -13.58 GPa, respectively.

引用

页码：855 / 863

页数：9

共 50 条

[41] An integrated method to determine elastic-plastic parameters by instrumented spherical indentation
Chang Yu
Yihui Feng
Rong Yang
Guangjian Peng
Zhike Lu
Taihua Zhang
Journal of Materials Research, 2014, 29 : 1095 - 1103
[42] A study on robust indentation techniques to evaluate elastic-plastic properties of metals
Lee, Jin Haeng
Kim, Taehyung
Lee, Hyungyil
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2010, 47 (05) : 647 - 664
[43] An integrated method to determine elastic-plastic parameters by instrumented spherical indentation
Yu, Chang
Feng, Yihui
Yang, Rong
Peng, Guangjian
Lu, Zhike
Zhang, Taihua
JOURNAL OF MATERIALS RESEARCH, 2014, 29 (09) : 1095 - 1103
[44] Elastic-plastic indentation stress fieldsusing the finite-element method
G CARE
A. C FISCHER-CRIPPS
Journal of Materials Science, 1997, 32 : 5653 - 5659
[45] Determination of Residual Stresses Utilizing the Variation of Hardness at Elastic-Plastic Indentation
Larsson, Per-Lennart
JOURNAL OF TESTING AND EVALUATION, 2019, 47 (04) : 3174 - 3184
[46] An elastic-plastic indentation model for different geometric indenters and its applications
Chen, Hui
Cai, Li-xun
Li, Chuanxi
MATERIALS TODAY COMMUNICATIONS, 2020, 25
[47] Scaling approach to conical indentation in elastic-plastic solids with work hardening
Cheng, YT
Cheng, CM
JOURNAL OF APPLIED PHYSICS, 1998, 84 (03) : 1284 - 1291
[48] Comparison of the elastic-plastic indentation response of MgAl2 O4, AlON, and AlN
Green, D.J. (djg7@psu.edu), 1600, Blackwell Publishing Inc., Postfach 10 11 61, 69451 Weinheim, Boschstrabe 12, 69469 Weinheim, Deutschland, 69469, Germany (96):
[49] ELASTIC PLASTIC INDENTATION DAMAGE IN CERAMICS - THE LATERAL CRACK SYSTEM
MARSHALL, DB
LAWN, BR
EVANS, AG
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1982, 65 (11) : 561 - 566
[50] Pressureless Sintering and Microstructural Densification of MgAlON Transparent Ceramics
Wang Yuezhong
Feng, Zhang
Meng, Tian
Zhang Rongshi
RARE METAL MATERIALS AND ENGINEERING, 2015, 44 : 101 - 104

← 1 2 3 4 5 →