Effects of boron doping on the grain-growth kinetics and mechanical properties of γ/γ' nickel-aluminum alloys

被引:5
|
作者
Chiu, YL [1 ]
Ngan, AHW [1 ]
机构
[1] Univ Hong Kong, Dept Mech Engn, Hong Kong, Hong Kong, Peoples R China
关键词
D O I
10.1007/s11661-000-0097-z
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effects of 0.5 at. pet of boron doping on the microstructures and mechanical properties of gamma/gamma ' nickel-aluminum alloys have been investigated in the present study. A nickel-rich grain-boundary zone was observed in the boron-doped alloy after homogenization at 1 100 degreesC and prolonged annealing at 1200 degreesC. Boron doping also caused remarkable improvements in toughness and tensile elongation and caused the fracture mode to change from completely intergranular to completely transgranular. The grain growth following recrystallization at 1200 OC was found to be retarded upon boron doping. A sudden increase in tensile elongation and a sudden drop in hardness were also observed upon prolonged heating during isothermal annealing at 1200 "C. The results are interpreted with reference to boron-nickel cosegregation at the grain boundaries.
引用
收藏
页码:3179 / 3186
页数:8
相关论文
共 50 条
  • [21] Effect of plastic deformation on mechanical properties and corrosion resistance of nickel-aluminum bronze
    Wu, Zhong
    Hu, Qing
    Qin, Zhenbo
    Zhang, Yiwen
    Xia, Da-Hai
    Hu, Wenbin
    ANTI-CORROSION METHODS AND MATERIALS, 2021, 68 (06) : 473 - 480
  • [22] EFFECT OF DOPANT AND HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NICKEL-ALUMINUM BRONZE
    Anene, Franklin Amaechi
    Nwankwo, Nkem Emelike
    Nwoke, Victor Ugochukwu
    METALLURGICAL & MATERIALS ENGINEERING, 2019, 25 (02) : 147 - 161
  • [23] TEXTURAL CHANGES DURING GRAIN-GROWTH OF RECRYSTALLIZED PURE NICKEL AND A FEW NICKEL-COBALT ALLOYS
    BHATTACHARYA, B
    RAY, RK
    ZEITSCHRIFT FUR METALLKUNDE, 1995, 86 (07): : 485 - 493
  • [24] GRAIN-GROWTH AND ITS KINETICS OF NANOPHASE NIOBIUM ALUMINIDE PRODUCED BY MECHANICAL ALLOYING
    KAWANISHI, S
    ISONISHI, K
    OKAZAKI, K
    MATERIALS TRANSACTIONS JIM, 1993, 34 (01): : 49 - 53
  • [25] Microstructural and Mechanical Properties of Friction Stir Welded Nickel-Aluminum Bronze (NAB) Alloy
    Kucukomeroglu, T.
    Senturk, E.
    Kara, L.
    Ipekoglu, G.
    Cam, G.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (01) : 320 - 326
  • [26] HEAT-TREATMENTS FOR OPTIMIZING MECHANICAL AND CORROSION RESISTING PROPERTIES OF NICKEL-ALUMINUM BRONZES
    DUMA, JA
    NAVAL ENGINEERS JOURNAL, 1975, 87 (01) : 45 - 64
  • [27] THEORY FOR INITIAL-STAGES OF GRAIN-GROWTH AND UNMIXING KINETICS OF BINARY-ALLOYS
    MIROLD, P
    BINDER, K
    ACTA METALLURGICA, 1977, 25 (12): : 1435 - 1444
  • [28] Microstructural and Mechanical Properties of Friction Stir Welded Nickel-Aluminum Bronze (NAB) Alloy
    T. Küçükömeroğlu
    E. Şentürk
    L. Kara
    G. İpekoğlu
    G. Çam
    Journal of Materials Engineering and Performance, 2016, 25 : 320 - 326
  • [29] Effect of Ti on Microstructure, Mechanical Properties and Corrosion Behavior of a Nickel-Aluminum Bronze Alloy
    Rivero, Pedro J.
    Berlanga, C.
    Palacio, J. F.
    Biezma-Moraleda, M. V.
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2021, 24 (02):
  • [30] Structure and Mechanical Properties of Slow-cooled, Cast Nickel-aluminum Alloy.
    Sahoo, M.
    Giessereipraxis, 1983, (23-24): : 365 - 376