Synthesis of high-purity Ti2A1N ceramic by hot pressing

被引:35
|
作者
Yan Ming [1 ]
Chen Yan-lin [1 ]
Mei Bing-chu [2 ]
Zhu Jiao-qun [2 ]
机构
[1] Hubei Univ Technol, Coll Chem & Environm Engn, Wuhan 430068, Peoples R China
[2] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China
基金
中国国家自然科学基金;
关键词
Ti(2)A1N; synthesis method; microstructure; hot pressing; sintering;
D O I
10.1016/S1003-6326(08)60015-1
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
High-purity Ti2A1N ceramic was prepared at 1300 degrees C by hot pressing(HP) of Ti/Al/TiN powders in stoichiometric proportion. The sintered product was characterized using X-ray diffraction(XRD) and MDI Jade 5.0 software (Materials Data Inc, Liverpool, CA). Scanning electron microscopy(SEM) and electron probe micro-analysis(EPMA) coupled with energy-dispersive spectroscopy(EDS) were utilized to investigate the morphology characteristics. The results show that Ti(2)A1N phase is well-developed with a close and lamellar structure. The grains are plate-like with the size of 3-5 mu m, thickness of 8-10 mu m and elongated dimension. 3 The density of Ti(2)A1N is measured to be 4.22 g/cm(3), which reaches 97.9% of its theory value. The distribution of Ti2A1N grains is homogeneous.
引用
收藏
页码:82 / 85
页数:4
相关论文
共 50 条
  • [21] Synthesis and characterization of high purity Mo2Ti2AlC3 ceramic
    Fu, Shuai
    Liu, Yunlong
    Zhang, Haiwen
    Grasso, Salvatore
    Hu, Chunfeng
    Journal of Alloys and Compounds, 2022, 815
  • [22] Synthesis and characterization of high purity Mo2Ti2AlC3 ceramic
    Fu, Shuai
    Liu, Yunlong
    Zhang, Haiwen
    Grasso, Salvatore
    Hu, Chunfeng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 815
  • [23] Preparation of high-purity SiC ceramics with good plasma corrosion resistance by hot-pressing sintering
    Liu, Meng
    Liu, Huan
    Ma, Ningning
    Liu, Yingying
    Liu, Xuejian
    Liu, Yan
    Huang, Zhengren
    Huang, Jing
    Yang, Yong
    CERAMICS INTERNATIONAL, 2022, 48 (20) : 29959 - 29966
  • [24] Synthesis of high-purity powder Ti3AlC2 materials by pressureless sintering
    Peng, CQ
    Wang, CA
    Huang, Y
    RARE METAL MATERIALS AND ENGINEERING, 2005, 34 : 540 - 543
  • [25] Synthesis of high-purity bulk Ti2AlN by spark plasma sintering (SPS)
    Yan Ming
    Mei Bingchu
    Zhu Jiaoqun
    Tian Chenguang
    Wang Ping
    CERAMICS INTERNATIONAL, 2008, 34 (06) : 1439 - 1442
  • [26] Synthesis of high-purity powder Ti3AlC2 materials by pressureless sintering
    Peng, Chunqing
    Wang, Changan
    Huang, Yong
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2005, 34 (SUPPL. 1 PART 1): : 542 - 543
  • [27] HIGH-PURITY TI SPUTTER TARGET FOR VLSIS
    ISHIGAMI, T
    ISHIHARA, H
    SHIMOTORI, K
    TOSHIBA REVIEW, 1987, (161): : 38 - 41
  • [28] HOT PRESSING OF HIGH PURITY CALCIUM OXIDE.
    Ramesh, K.S.
    Yasuda, Eiichi
    Bao, QinLi
    Kimura, Shiushichi
    Tanabe, Yasuhiro
    Report of the Research Laboratory of Engineering Materials Tokyo, 1986, (11): : 129 - 134
  • [29] Densification behavior of high purity SiC by hot pressing
    Lee, Eun Ju
    Lee, Dong Hwa
    Kim, Jong Chan
    Kim, Deug Joong
    CERAMICS INTERNATIONAL, 2014, 40 (10) : 16389 - 16392
  • [30] PRODUCING ULTRAFINE, HIGH-PURITY CERAMIC POWDERS BY TURBOMILLING
    HOYER, JL
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1992, 44 (03): : 54 - 54