Synthesis of high-purity Ti2A1N ceramic by hot pressing

被引：35
|
作者：
Yan Ming [1 ]
Chen Yan-lin [1 ]
Mei Bing-chu [2 ]
Zhu Jiao-qun [2 ]
机构：
[1] Hubei Univ Technol, Coll Chem & Environm Engn, Wuhan 430068, Peoples R China
[2] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2008年 / 18卷 / 01期
基金：
中国国家自然科学基金;
关键词：
Ti(2)A1N; synthesis method; microstructure; hot pressing; sintering;
D O I：
10.1016/S1003-6326(08)60015-1
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
High-purity Ti2A1N ceramic was prepared at 1300 degrees C by hot pressing(HP) of Ti/Al/TiN powders in stoichiometric proportion. The sintered product was characterized using X-ray diffraction(XRD) and MDI Jade 5.0 software (Materials Data Inc, Liverpool, CA). Scanning electron microscopy(SEM) and electron probe micro-analysis(EPMA) coupled with energy-dispersive spectroscopy(EDS) were utilized to investigate the morphology characteristics. The results show that Ti(2)A1N phase is well-developed with a close and lamellar structure. The grains are plate-like with the size of 3-5 mu m, thickness of 8-10 mu m and elongated dimension. 3 The density of Ti(2)A1N is measured to be 4.22 g/cm(3), which reaches 97.9% of its theory value. The distribution of Ti2A1N grains is homogeneous.
引用
收藏
页码：82 / 85
页数：4
相关论文
共 50 条
  • [1] Synthesis of high-purity Ti2AlN ceramic by hot pressing
    严明
    陈艳林
    梅炳初
    朱教群
    Transactions of Nonferrous Metals Society of China, 2008, (01) : 82 - 85
  • [2] Synthesis of high-purity Ti3SiC2 polycrystals by hot-pressing of the elemental powders
    Luo, YM
    Pan, W
    Li, SQ
    Chen, J
    Wang, RG
    Li, JQ
    MATERIALS LETTERS, 2002, 52 (4-5) : 245 - 247
  • [3] Synthesis of high-purity Ti3SiC2 and Ti3AlC2 by hot-pressing (HP)
    Zhu, JQ
    Mei, BC
    Liu, J
    Xu, XW
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2003, 22 (15) : 1111 - 1112
  • [4] The Corrosion Behavior of Ti2A1N and Ti2A1N/TiN Composite
    Yan Ming
    Chen Yanlin
    Chang Ying
    Jiang Jiuxin
    Mei Bingchu
    2011 INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS AND NEURAL COMPUTING (FSNC 2011), VOL VII, 2011, : 96 - 99
  • [5] HOT-PRESSING OF HIGH-PURITY MAGNESIUM-OXIDE
    VIEIRA, JM
    BROOK, RJ
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1984, 67 (07) : 450 - 454
  • [6] Synthesis of high purity Ti3AlC2 bulk material by hot-pressing
    Peng, CQ
    Wang, CA
    Huang, Y
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1369 - 1372
  • [7] HOT ISOSTATIC PRESSING OF HIGH-PURITY ALUMINUM-OXIDE POWDER
    MCCOY, JK
    WILLS, RR
    AMERICAN CERAMIC SOCIETY BULLETIN, 1984, 63 (12): : 1477 - 1477
  • [8] HOT ISOSTATIC PRESSING OF HIGH-PURITY ALUMINUM-OXIDE POWDER
    MCCOY, JK
    WILLS, RR
    AMERICAN CERAMIC SOCIETY BULLETIN, 1984, 63 (08): : 1001 - 1001
  • [9] Synthesis and mechanical properties of high-purity Cr2AlC ceramic
    Ying, Guobing
    He, Xiaodong
    Li, Mingwei
    Han, Wenbo
    He, Fei
    Du, Shanyi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2635 - 2640
  • [10] Densification and grain growth behaviour of high-purity MgO ceramics by hot-pressing
    Chen, Miaoqin
    He, Jinjiang
    Zhang, Yuli
    Ding, Zhaochong
    Luo, Junfeng
    CERAMICS INTERNATIONAL, 2017, 43 (02) : 1775 - 1780
12345