A 100 W 5.1-Channel Digital Class-D Audio Amplifier With Single-Chip Design

A 100 W, 5.1-channel, single-chip, digital-input class-D audio amplifier with a low-voltage (LV) digital circuit and high-voltage (HV) switching power stage is designed for moderate-performance and cost-effective speaker systems. The LV portion, including multi-channel audio processors, delta-sigma modulators (DSMs), and pulse-width modulation (PWM) generators, is implemented with a standard CMOS digital cell-library. A dual-loop resonator is proposed to increase the stable input range of the DSM so that the low-distortion output power of the class-D amplifier can be increased. For the HV portion, distortion caused by parasitic resistances of the power stage is analyzed to obtain a better design. A multi-phase PWM switching technique is proposed to prevent the multi-channel output stages from simultaneously switching, and thus the supply bouncing can be reduced. An over-current protection circuit with high supply noise immunity is also presented. Fabricated with 0.35/3-mu m 3.3/18-V 1P3M CMOS technology, the 5.1-channel amplifier achieves a total root-mean-square (RMS) output power of 100W, a distortion of less than 0.7%, and a power efficiency of 88% with a total chip area of 48.9 mm(2).