RESEARCH ON SIMULTANEOUS INJECTION OF WASTE TIRES WITH PULVERIZED COAL FOR BLAST FURNACE

被引:0
|
作者
Yan, Bingji [1 ]
Zhang, Jianliang [1 ]
Guo, Hongwei [2 ]
Liu, Feng [1 ]
机构
[1] Univ Sci & Technol Beijing, Sch Met & Ecol Engn, Beijing, Peoples R China
[2] Soochow Univ, Shagang Sch Iron & Steel, Suzhou, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
D O I
暂无
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Recycling and reuse of waste tires are of great significance from the perspective of environmental protection. In this paper, the feasibility of simultaneous injection of fully ground waste tires with pulverized coal was explored. The properties of six types of raw coal as well as three types of pulverized coal blends were determined. Meanwhile, the proximate analysis of the bicycle inner tube and tire was carried out. Afterwards, 30 kinds of injectants were derived by blending the bicycle inner tube and tire particles of various sizes with six types of raw coal. Then the calorific value and the combustion rate of obtained samples were experimentally measured. It was found that the mixture of waste tire and raw coal possessed a comparable calorific value with raw coal as well as pulverized coal blends while the combustion rate was considerably improved due to the addition of the bicycle inner tube and tire. Therefore, the waste tire after mechanically grinding could act as a supplement fuel to be injected into the blast furnace with pulverized coal. In addition, the research results indicated that the addition of 10% bicycle inner tube and tire resulted into a higher combustion rate than 5% addition. Hence, it was reasonable to claim that 10% addition was an optimal value.
引用
收藏
页码:135 / 144
页数:10
相关论文
共 50 条
  • [1] Technical Research on Economical Pulverized Coal Injection for Blast Furnace
    Xu Wan-ren
    Li Zhao-yi
    Guo Yan-ling
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2009, 16 : 767 - 770
  • [2] SIMULTANEOUS INJECTION OF PULVERIZED COAL AND DOLOMITE INTO BLAST-FURNACE TUYERES
    YAMAGATA, C
    KAJIWARA, Y
    SUYAMA, S
    SATO, K
    KOMATSU, S
    ISIJ INTERNATIONAL, 1990, 30 (05) : 362 - 371
  • [3] Application and Research on Coal Blending Model for Pulverized Coal Injection of Blast Furnace
    Ma Ze-jun
    Zhu Wei-chun
    Ma Li
    Pan Wen
    Wang Dong-qing
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2009, 16 : 821 - 824
  • [4] Technology for pulverized coal injection into blast furnace
    Schmidt, L.
    Stal', 2002, (11): : 9 - 12
  • [5] OUTLOOK OF PULVERIZED COAL INJECTION INTO A BLAST-FURNACE
    INABA, S
    YAGI, J
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1992, 78 (07): : 1187 - 1197
  • [6] Improved pulverized coal injection technology for the blast furnace
    Schott, Robin
    STAHL UND EISEN, 2013, 133 (01): : 49 - +
  • [7] Video monitoring of pulverized coal injection in the blast furnace
    Birk, W
    Marklund, O
    Medvedev, A
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2002, 38 (02) : 571 - 576
  • [8] Video monitoring of pulverized coal injection in the blast furnace
    Birk, W
    Marklund, O
    Medvedev, A
    CONFERENCE RECORD OF THE 2001 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-4, 2001, : 1354 - 1358
  • [9] Conveying Property of Injection Pulverized Coal into Blast Furnace
    Song Chunyan
    Gui Yongliang
    Hu Binsheng
    SENSORS, MEASUREMENT AND INTELLIGENT MATERIALS, PTS 1-4, 2013, 303-306 : 2577 - 2580